Pump Wet Ends and Related Parts

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct...

This is a 3HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo...

This is a 3HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo...

This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...

This part is a Kit that features (1) Seal, (2) Bearings, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes onto the...

This part is a Kit that features (1) Seal, (2) Bearings, Seal Tool and Silicon that fit (8) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit (8) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit (8) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes onto the...

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This part is NO Longer Available and there are no replacements.. This Part is a Volute Back with 4 mounts only for a Piranha Ther-Flo, Thera-Max  pump only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific...