Waterway 230 Volt Pumps

Waterway 230 Volt Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Pump Waterway Executive True 3.0hp 230v 2-spd 56fr 2" 12 Amp
Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage. This is an example of a pump motor sticker showing the Amperage and you determine your pumps HP by the Amperage not what is written on the motor sticker.
    Add to Cart

    Pump Waterway Executive 3.0hp 230v 2-spd 56fr 2" 12 Amp, Called 4.0HP

    MSRP: $713.99
    $449.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...
    MSRP: $713.99
    $449.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $713.99
    $449.99
    Subtotal:
  • Hot Tub Spa 2" Slip X 2" Threaded Pump Union & Gasket How To Video Pump Union 2" Threaded  x 2" Slip The thread width on the wet end that this union screws on is 3" wide.
    Add to Cart

    Hot Tub Spa 2" Slip X 2" Threaded Pump Union & Gasket How To Video

    MSRP: $12.99
    $9.99
    This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...
    MSRP: $12.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $9.99
    Subtotal:
  • Total: items /

Adding your products to cart