Jet Pumps, Complete
Jet Pumps, Complete
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/aqua-flo-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/intertek-lx-chinese-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/jacuzzi-sundance-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/vico-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/waterway-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/watkins-wavemaster-complete-pumps/
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Stronger Pump Bleeder Barb Kit, Fits Watkins, Wavemaster, XP2, XP2E, LX, 1/4" Barb x 1/4"Npt
MSRP: $16.99$10.99This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....MSRP: $16.99$10.99 -
Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
MSRP: $13.99$9.99This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...MSRP: $13.99$9.99 -
Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
MSRP: $8.99$6.99This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...MSRP: $8.99$6.99 -
Pump Bleeder Barb, Watkins, Wavemaster, LX, 1/2" Barb x 1/4" Mpt, Tapered Style
MSRP: $13.99$9.99This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...MSRP: $13.99$9.99 -
Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 1Spd, 230V, 10.0A, Bracketless, 48WUA2002C-II, 6500-091 , 6500-097 , 6500-341 , 6500-349
MSRP: $499.99$379.99This part is a 2.0 Horse Power 10.0 Amp (1) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA2002C-II and...MSRP: $499.99$379.99 -
Pump Waterway Executive 2.0hp 230v 2-spd 56fr 2 1/2" X 2" 8 Amp
MSRP: $659.99$479.99This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2 1/2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This Pump is a 2 1/2" x 2" which is only found in a few hot tubs like Catalina, Some Leisure...MSRP: $659.99$479.99 -
WBC150, 48Fr, LX Pump, Intertek, 1 1/2" X 1 1/2", 1.0HP, 1 Speed, 115V
MSRP: $439.99$349.99This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. These pumps usually have the part number WBC150 on the label for an Intertek Pump. Manufacturer Lingxiao-Pump Pump Model WBC Speed 1 Speed...MSRP: $439.99$349.99 -
1431501-03, 48Fr, LX Pump, 1 1/2" X 1 1/2", 1.0HP, 1 Speed, 115V, Vendor Code 3536
MSRP: $439.99$349.99This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Hot Tubs. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version...MSRP: $439.99$349.99 -
Replacement Pump, 39583, Aqua-Flo, Vendor Code 4081, 1.5HP, 115v, 13.0A, 48 frame, 2"x 2", 1 or 2 Speed
MSRP: $629.99$529.99This complete pump and motor is a Aqua-Flo replacement Pump, 39583, 115V (2) Speed 48 frame 2" x 2" pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a...MSRP: $629.99$529.99 -
1431701-03 Vendor 3536 48Fr LX Pump 2" X 2" 1.5HP 2 Speed 115V
MSRP: $449.99$399.99This 1431701-03 Vendor Code 3536 48Fr LX Pump 2" X 2" 1.5HP 2 Speed 115V Complete Pump and motor.. This pump is a replacement for the orginal 1431701-03 pump found on some 3536 Code hottubs.. NOTE about Watkins Wavemaster Complete Pumps:...MSRP: $449.99$399.99 -
Complete Pump, Aqua-Flo, FMCP, 2.0HP, 115v, 2-spd, 48fr, 1-1/2", 1 or 2 Speed, 8.5A
MSRP: $699.99$579.99This Pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 3" across the threads... High speed Amperage is 8.5A and low speed is 2.8 Amps.. Motor...MSRP: $699.99$579.99 -
39577 Aqua-Flo Impeller & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081
MSRP: $58.99$48.99This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type Closed Face Impeller Diameter...MSRP: $58.99$48.99