Pumps and Related Parts

Tnei part is no longer available you can only order the complete wet end found Here: Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v Waterway Iron Might Circulation Pump Impeller for 1/8HP Pump Closed face impeller made...

This part is a thru-bolt Motor only , Century, 2.0hp, 230v, 2-spd, SF 1.00, 48Y frame, 10.5/2.6A. It fits most 48 frame wetends from companies like Waterway, Aqua-Flo, Vico, Balboa, Sta-rite and many more. Can be used to replace single speed motors, just...

This Pump is a 48Frame 230V 2 Speed with a 1.0 HP Wet End that features a 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 6.8-7.7 and low speed is 2.2 Amps..   Complete Pump...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...

CAT: BN34V1 MODEL: 177783 TYPE: C/F FR: 48Y HP: 1.5/.188 SF: 1.0 PH: 1 HZ: 60 RPM: 3450/1725 ROT: CCWPE VOLTS: 230 AMPS: 6.5/2.5 MAX AMPS: SF AMPS: TIME: CONT ENCL: ODP THERMALLY PROTECTED FORM: CODE: F48AD44A01 INSUL CLASS: B AMB.: 4012 & 3 OÕclock...

CAT: BN35SS MODEL: 186886 TYPE: CS FR: R 48 Y HP: 1.5 SF: 1.0 PH: 1 HZ: 60 RPM: 3450 ROT: CCWPE VOLTS: 230/115 AMPS: 8.0/16.0 MAX AMPS: SF AMPS: - TIME: CONT ENCL: ODP THERMALLY PROTECTED FORM: PHM CODE: G INSUL CLASS: B AMB.: 40¡C12 & 3 OÕclock Conduit...

This pump is a Wow High Performance Pump with 1 1/2" x 1 1/2" connections that measure about 2 3/8" across the threads.. It is a 1.0HP 115V 9.0Amp 1.0HP pump with an Air Switch and Cord.. This Vico-Ultrajet range of Hydro-Massage Whirlpool Pumps have...

This Kit is an 1HP Impeller for an Executive 48 Frame Wet End up to 1HP Motor and a 56 Frame Wet End 1HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...

This pump is a 56 frame Motor with a Vico Side Discharge Wet End with 2" Suction and Pressure Threaded fitting that measure about 3" from edge to edge on the threads. This is a 2 Speed pump and the Amerage is 8.8 on high speed and 3.0 on low speed which...

The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end...

This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a vane width of 1/2".. This can be found on motors with...

This part is a Complete Flo-Master FMCP 1.5HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High...