Pumps and Related Parts

You are buying a 5 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will...

This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of about 12 Amps or a 230V motor with an Amperage rating of...

This part is a Complete Pump and motor, Vico Ultima, 2.0hp, 230v, 2-spd, 48fr, 2"Side Discharge..The connections on this pump are 2" x 2" which measures about 3" Edge to edge on the threads.. Spa Pump Features: Compact 48 frame design Dual Speed...

This Wet End is a 2" x 2" 3.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 12.0 Amps High speed there are no 115v versions of this wet end..  This side discharge, 2" x 2" mbt which would measure about 3" edge...

This is a Waterway Tiny Might Circulation Pump that is 1" x 1" which measures about 1 7/8" to the outside of the threads. It is high in efficiency and low on power use. Tiny Might packs a not-so-tiny punch. The Tiny Might offers you a great low flow...

This 115V Laing E-10 pump with a 1" Barb Suction and Pressure Side which measures about 1" Outside Diameter and the hose is 1" Inside Diamater  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed with...

This part is a Complete FMHP .75HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 7.0 Amps on High Speed on a 230V...

This part is a 100' Roll of Clear Tubing that is 1" OD , 3/4" ID. These Tubing is used for connecting some Water Manifolds, Water Control Valves and Waterfalls in Hot Tubs.  We Offer this Tubing with other parts in kits we are offering in our store...

Start Capacitor1-7/16"dia x 2-3/4"hgt

Note: This Wet End is no longer available but we do have an alternative which is not an exact replacement but will work as long as your connecting plumbing is not rigid and can be move a little.. Meaning your pump is plumbed with flexible pipe so the...

This part is a 10' section of Air Tubing 1/8" inside diameter is used with Air Button, Air Button Style Topsides and Air Switch Applications and between Garden Tub Pumps and Air Button Switches...   Air Tubing Inside...