Pumps and Related Parts

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit Pump Seal Kit with Silicon , that fits a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and...

This 1.65HP Impeller fits a Watkins Vendor Code 0108 Wet End.. It can be found under the Name Wavemaster 7000 on Hot Spring, Caldera, Tiger River, Solana or Hot Spot tubs... You need to look at the face to determine if this is your Wet End.. Closed face...

This 1.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 15.6-16.0 Amps on a 115V motor or 7.8-9.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on...

This is a 2.5HP Seal, (2) Bearings & Impeller Kit with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Fits Some Watkins Hot Spring...

This is a 2.5HP Seal, (1) Bearing & Impeller Kit with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Fits Some Watkins Hot Spring....

This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal, (2) Bearing & Impeller Kit with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...

This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal, (1) Bearing & Impeller Kit with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...

This is a 1.5-1.65HP Seal Kit, (2) Bearing & Impeller for Watkins, Vendor # 4081, Wavemaster Pumps. This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers...

This is a 1.5-1.65HP Seal Kit, (1) Bearing & Impeller for Watkins, Vendor # 4081, Wavemaster Pumps. This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers...

  This is a 1HP Seal, (2) Bearing & Impeller Kit for a Watkins 37334 Vendor Code# 4081 Pump with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Wavemaster 48 1.0HP Motor would be about 7-8.0 Amps on high speed at 230V or 11-12...

  This is a 1HP Seal, (1) Bearing & Impeller Kit for a Watkins 37334 Vendor Code# 4081 Pump with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Wavemaster 48 1.0HP Motor would be about 7-8.0 Amps on high speed at 230V or 11-12...