Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"

(No reviews yet) Write a Review
SKU:
HTP34-270-AK98
Shipping:
Calculated at Checkout
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • The Suction Side of this pump measures about 3" Across the threads..
  • The Pressure Side is the same for all Executive 56fr Wet Ends. It measures about 3" Across the threads..
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"
MSRP: $639.99
$515.99
— You save $124.00

Description

This Listing is for a Waterway Executive 16.4 Amp 56fr 2 Speed 230V 5 HP 2" X 2" Pump.

Your sticker may say 5-6HP. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to the 3, 6, or 9 O'clock position and a Bleeder fitting that can be added if you old pump had a bleeder.

Note: A lot of cases the old bleeder breaks when removing so this helps you to complete the repair quickly. See the chart below to determine what HP your pump is.

Don't pay attention to the label HP it will tell you all kinds of Horse Powers.

If you decide to try to up your real HP by buying a pump with a Higher Amperage you can and will damage other components like your board.

I have a Video illustrating the information on this pump.


Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example. 8.0 = 1 HP 10.0 = 2 HP 12.0 = 3 HP 14.0 = 4 HP 16.0 = 5 HP NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.



Complete Pump Type    Portable Spa Pump
Speed    2 Speed (2-Spd)
Motor Voltage    230v
Drain Plug Location    3,6,9 o`clock
Pump to Motor Foot Types    4a
Suction Style    Center
Suction Connection (Physical Dimension)    3-1/16"od
Suction Connection Type    Male Buttress Thread (mbt)
Suction Pipe Size    2"
Discharge Style    Side
Discharge Connection (Physical Dimension)    3-1/16"od
Discharge Connection Type    Male Buttress Thread (mbt)
Discharge Pipe Size    2"
Horsepower    5.0hp
Motor Frame    56 Frame Thru-Bolt
Motor Amperage/Wattage    16.4A/4.8A
Manufacturer    Waterway
Pump Model    Executive
Manufacturer Impeller Number    Click Here
Volute Fastening Type    8 Screws
Volute/Sealplate Number    315-1240
Manufacturer Wet End Number    Click Here


 

View AllClose