Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v, 56fr, 2"x 2, 1 or 2 Speed 15A

(No reviews yet) Write a Review
SKU:
HTP34-402-KL54
Shipping:
Calculated at Checkout
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  •  Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • This 2" Pressure side fitting measures about 3" edge to edge. Pump,Aqua-Flo, XP2e,4.0HP ,230v, 2-spd, 56fr, 2"x 2"
  • This 2" Suction side fitting measures about 3" edge to edge. Pump,Aqua-Flo, XP2e,4.0HP ,230v, 2-spd, 56fr, 2"x 2"
  • This is a properly wired pump with Red as High Speed Black as Low Speed and White as Hot Neutral for this Pump, Aqua-Flo, XP2e, 4.0, HP, 230v, 2-spd, 56fr, 2"X 2" Note: There are some rare occasions where Black is High Speed and Red is Low so look at your old pump before removing the wire to be sure. If you didn't make sure when you power up the first time listen for the pump to come on in low speed first if it is high first you have the wires backward which will cause your hot tub to overheat.
  • This is an example of the label on this pump showing the amperages are 15.0 on High Speed and 4.8 on low making it a between a 4 and 5 horse power using our HP Chart. Although this pump is a high horse power pump be careful when you order and try to make more power on your hot tub if you have weak or undersized wiring a high amperage pump like this can cause weak areas of your hot tubs system fail. Pump,Aqua-Flo, XP2e,4.0HP ,230v, 2-spd, 56fr, 2"x 2"
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
  • Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v,  56fr, 2"x 2, 1 or 2 Speed 15A
MSRP: $755.99
$549.99
— You save $206.00

Description

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.  

This pump is a 4-5HP 56 frame 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3" edge to edge.

On the label on this pump show the amperages are 15.0 on High Speed and 4.8 on low making it a between a 4 and 5 horse power using our HP Chart. Although this pump is a high horse power pump be careful when you order and try to make more power on your hot tub if you have weak or undersized wiring a high amperage pump like this can cause weak areas of your hot tubs system fail.

Note: You need to be sure of your voltage by checking one of two things. Either the label on the pump which will say either 115V or 230V or you can look to see where the white wire from the pump is located in the pack if you can't see the label. If the white wire is on the red leg or #2 leg the pump is 230V if it is on the Neutral or the White AC leg. Always turn the breaker to the hot tub off before doing any of these checks.   

 

Spa Pump Features:
  • Fine tuned impeller that moves water through the system with maximum performance
  • 2" intake and discharge
  • 56-frame motor for added strength
  • Thermally protected to extend life expectancy of motor
  • Continuous duty horsepower of 1.5hp, 2.0hp, 3.0hp, 4.0hp, and 5.0hp. Single or dual speed (SEE THE AVAILABLE STYLES TAB)

 

34-402-5252 Pump,Aqua Flo XP2e,3.0ohp/4.0thp,230v,2-Spd,56fr,2",OEM      
34-402-5250 Pump,Aqua Flo XP2e,2.0ohp/3.0thp,230v,2-Spd,56fr,2",OEM      
34-402-5254 Pump,Aqua Flo XP2e,4.0ohp/5.0thp,230v,2-Spd,56fr,2",OEM
 
Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump. 
 
Complete Pump Type
  Portable Spa Pump
Speed 2 Speed (2-Spd)
Motor Voltage 230v
Drain Plug Location 4,6,9 o`clock
Pump to Motor Foot Types 9
Suction Style Center
Suction Connection (Physical Dimension) 3-1/16"od
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection (Physical Dimension) 3-1/16"od
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 4.0hp
Motor Frame 56 Frame Thru-Bolt
Motor Amperage/Wattage 15.0A/4.8A
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master XP2e
Manufacturer Impeller Number 91695401
Volute Fastening Type 8 Screws
Volute/Sealplate Number 92770705
 
 
View AllClose