You are buying a Tecmark 1 Amp Pressure Switch that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections. Watch the Video for How To Information on Pressure Switches. This Universal Switch fits Balboa, Gecko, ACC, Hydroquip, Len Gordon, Maddux and most other standard Hot Tub Heater Tubes. What goes wrong with these switches is either the Switch does not close when the pump comes on and puts pressure on the switch or it doesn't open when the pump goes off. If either of these things happens you will have a flo code on most systems. The are other things that will cause a flo code like an inoperative pump or a stopped up filter so be sure the switch is bad before replacing. This part used in most hot tubs that use digital control systems with low current draw across the switch 1 Amp or less if your system Is an Air Button Style and has the heater power running through the switch you would use a 20-25 Amp Switch This system is rare and usually a 115V Air Button system only. The Pressure Switch in this listing will not work in that application.
WARNING: DO NOT ADJUST THIS SWITCH IT WILL VOID THE WARRANTY!! CONTACT ME AND I WILL HELP YOU FIGURE OUT WHATS WRONG. IF YOU HAVE TO ADJUST THIS SWITCH MOST LIKELY THERE IS SOMETHING ELSE WRONG AND ADJUSTING THE SWITCH WILL NOT SOLVE IT LONG TERM!!
Posted by Unknown on Dec 12th 2017
Worked like a charm. Watched the "Spa Guy" video to make sure it was what I needed. Saved a lot of money doing it myself.
Posted by John GRDEN, JR. on May 25th 2017
The part cane very quickly. The old switch came out fairly easy. the new part, along with it's shiny new Teflon tape, screwed in by hand. Did not need to tighten with wrench. It went to work immediately telling me I had a FLO issue on high speed.
Posted by Andrew on Oct 6th 2016
hot tub did not heat up and showed flo code, replaced it with the new part. now it heats up on high jets, still shows flo on low jets( do not know why?). but it fixed the heat problem and it works. if i have any other problems(i hope not) this will be the place where i buy my stuff from. - thank you!
Posted by Unknown on Sep 14th 2016
Had FL code, tub would not heat. Watched video, ordered the part he pointed to in the how to video. It should be noted that my factory pressure switch looked nothing like this, so I was anxious to order it. He is right, it is the right part. BBalboa system in a small marquis tub. Followed instructions, replaced, rebooted, tub is back up and working perfect.
These are my parts guys now. Thank you for the video.
Posted by Matt on Aug 24th 2016
Outstanding customer experience and prompt delivery. With the video as my guide I easily replaced my malfunctioning pressure switch. Probably saved me $200 over calling a local repairman.
Posted by Unknown on May 7th 2016
I hava a older spa (20 yo) and uses older system. Element stopped heating.....ordered switch, replaced, back in business!
Posted by J on Feb 22nd 2016
The part works just like as described in the video. Through your video I was able to determine what part was needed to get my spa back up and running. Thanks again!