Water Manifolds & Related Parts

Water Manifolds & Related Parts

This Category features Hot Tub Water Manifolds which means these parts go between the Pumps and the jets in your Hot Tub. The older tubs generally had glue in style manifold meaning the hoses to the manifolds from the pumps glued in and the hoses from the manifold to the jet bodies where glued in. The more modern hot tubs still glue in from the pump side but most use barbs from the manifolds to the jet bodies with clear hose and clamps. The beauty of the new style is the virtual elimination of long term leaks and the ease of replacement if you have a problem like freeze damage. Keep in mind when searching that you can replace the old style with the new style by either gluing and clamping the clear tube from the manifolds over the old white pipe going to your jets if it is 1/2" (which would measure 3/4" O.D. or by gluing in conversion barbs that would accept 3/4" or 1" pipe and convert them to 3/4" Barbs where you would plumb from the the new manifold with clear tube to the old white flex pipe virtually eliminating the possibility of future leaks. If you choose the old style manifolds and glue the old pipe back into them they will leak almost every time because the white flex pipe has shrunk up over the years and that is probably what caused the leaks in the first place on the glue in the old style manifolds. Feel free to contact us if you have questions about how to convert the old system to the new system. The Glue in fittings from the pump to the manifolds are normally 1 1/2" or 2" and rarely leak it is usually the smaller sizes that are on the pressure side that leak when the glued in style was used.

Note: When gluing New Valves to old plumbing you need to "Spin It To Win It" so you don't have any leaks so watch the video on "Spin It To Win It" glue techniques. Please don't be a drip, "Spin It To Win It"

To figure out what size manifold you need look at the chart below for size conversions.

This is a chart for the outside of your plumbing pipes so you can figure out what size parts to order. Note: The actual size a part is called is not the actual size of the hole in the part it is really the Inside Diameter of the pipe that would glue into that part which doesn’t make sense, since you cannot see inside the pipe. Therefore I am giving you the measurements of the outside of the pipe so you know what size part to order.  For example a part that is ½” plumbing would glue into would actually measure ¾” inside the hole of the part and on the outside of the pipe that glues into the part.

Pipe Outside Diameter chart:

½” Outside Diameter is ¾”

¾” Outside Diameter is 1”

1” Outside Diameter is 1 ¼”

I have never seen 1 ¼” in Hot Tubs

1 ½” Outside Diameter is 1 ⅞”

2” Outside Diameter is 2 ⅜”

2 ½” Outside Diameter is 2 ⅞”

 

Save

Save

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Manifold Hot Tub Spa 2" Street x 2" Slip (6) 3/4" Coupler Glue Kit Video How To Manifold Hot Tub Spa 2" Street x 2" Slip (6) 3/4" Coupler Glue Kit Video How To
    Add to Cart

    Manifold Hot Tub Spa 2" Street x 2" Slip (6) 3/4" Coupler Glue Kit Video How To

    MSRP: $106.99
    $70.99
    See the Informational videos here first. This Kit is a 2" Street X 2" Slip X (6) 3/4" Barbs Manifold Replacement Kit with Glue. The Kit consists of the Manifold with (6) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 5 barbs, a 2"...
    MSRP: $106.99
    $70.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $106.99
    $70.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Street x 2" Slip (6) 3/4" Coupler Kit Video How To The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
    Add to Cart

    Manifold Hot Tub Spa 2" Street x 2" Slip (6) 3/4" Coupler Kit Video How To

    MSRP: $84.99
    $52.99
    See the Informational videos here first. This Kit is a 2" Street X 2" Slip X (6) 3/4" Barbs Manifold Replacement Kit. The Kit consists of the Manifold with (6) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 5 barbs, a 2" Coupler, 6"...
    MSRP: $84.99
    $52.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $84.99
    $52.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Dead End x 2" Slip x (2) 3/4" Coupler Glue Kit Video How To This kit features 3/4" ID Tubing to extend your original plumbing..
    Add to Cart

    Manifold Hot Tub Spa 2" Dead End x 2" Slip x (2) 3/4" Coupler Glue Kit Video How To

    MSRP: $74.99
    $55.99
    See the Informational videos here first. This kit is a 2" Dead End X 2" Slip X (2) 3/4" Barbs Manifold Replacement Kit with Glue. The Kit consists of the 2" Street X 2" Slip Manifold with (2) 3/4" Barbs, (1) Barb Plug to cut the manifold...
    MSRP: $74.99
    $55.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $74.99
    $55.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Dead End x 2" Slip x (2) 3/4" Coupler Kit Video How To The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
    Add to Cart

    Manifold Hot Tub Spa 2" Dead End x 2" Slip x (2) 3/4" Coupler Kit Video How To

    MSRP: $52.99
    $37.99
    See the Informational videos here first. This kit is a 2" Dead End X 2" Slip X (2) 3/4" Barbs manifold Replacement Kit. The Kit consists of the 2" Street X 2" Slip Manifold with (2) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 1...
    MSRP: $52.99
    $37.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $52.99
    $37.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Street x 2" Slip x (2) 3/4" Coupler Glue Kit Video How To The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
    Add to Cart

    Manifold Hot Tub Spa 2" Street x 2" Slip x (2) 3/4" Coupler Glue Kit Video How To

    MSRP: $74.99
    $55.99
    See the Informational videos here first. This kit is a 2" Street X 2" Slip X (2) 3/4" Barbs manifold Replacement Kit. The Kit consists of the 2" Street X 2" Slip Manifold with (2) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 1...
    MSRP: $74.99
    $55.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $74.99
    $55.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Kit Video How To The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
    Add to Cart

    Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Kit Video How To

    MSRP: $56.99
    $45.99
    See the Informational videos here first. This kit is a 2" Street X 2" Slip X (4) 3/4" Barbs manifold Replacement Kit. The Kit consists of the 2" Street X 2" Slip Manifold with (2) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 3...
    MSRP: $56.99
    $45.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $56.99
    $45.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Glue Kit Video How To The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
    Add to Cart

    Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Glue Kit Video How To

    MSRP: $88.99
    $63.99
    See the Informational videos here first. This kit is a 2" Street X 2" Slip X (4) 3/4" Barbs Manifold with Glue Replacement Kit. The Kit consists of the 2" Street X 2" Slip Manifold with (4) 3/4" Barbs, (1) Barb Plug to cut the manifold...
    MSRP: $88.99
    $63.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $88.99
    $63.99
    Subtotal:
  • Manifold Hot Tub Spa 2" Street x 2" Slip x (2) 3/4" Coupler Kit Video How To The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
    Add to Cart

    Manifold Hot Tub Spa 2" Street x 2" Slip x (2) 3/4" Coupler Kit Video How To

    MSRP: $52.99
    $37.99
    See the Informational videos here first. This kit is a 2" Street X 2" Slip X (2) 3/4" Barbs manifold Replacement Kit. The Kit consists of the 2" Street X 2" Slip Manifold with (2) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 1...
    MSRP: $52.99
    $37.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $52.99
    $37.99
    Subtotal:
  • PVC Leak Loc Low Voc Hot Blue Glue  8oz for Hot Tub Spa PCV Plumbing Repair 
No Purple Primer Needed.. PVC Leak Loc Low Voc Hot Blue Glue  8oz for Hot Tub Spa PCV Plumbing Repair 
No Purple Primer Needed..
    Add to Cart

    PVC Leak Loc Low Voc Hot Blue Glue 8oz for Hot Tub Spa PCV Plumbing Repair

    MSRP: $23.99
    $18.99
    This part is Leak Loc One-Step Blue Glue! This Item is (1) 1/2 Pint or 8OZ of Hot Blue Glue and no Purple Primer is needed with this glue. The size glue is used for small jobs (2-4 Manifolds)to Glue PVC Plumbing Parts...
    MSRP: $23.99
    $18.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $23.99
    $18.99
    Subtotal:
  • PVC Leak Loc Low Voc Hot Blue Glue  4oz for Hot Tub Spa PCV Plumbing Repair 
No Purple Primer Needed.. PVC Leak Loc Low Voc Hot Blue Glue  4oz for Hot Tub Spa PCV Plumbing Repair 
No Purple Primer Needed..
    Add to Cart

    PVC Leak Loc Low Voc Hot Blue Glue 4oz for Hot Tub Spa PCV Plumbing Repair

    MSRP: $19.99
    $14.99
    This part is Leak Loc One-Step Blue Glue! This Item is (1) 1/4 Pint of Hot Blue Glue and no Purple Primer is needed with this glue. The size glue is used for small jobs (1-2 Manifolds)to Glue PVC Plumbing Parts together...
    MSRP: $19.99
    $14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $19.99
    $14.99
    Subtotal:
  • Hoss Manifold, Hot Tub, Spa Part, 2" slip x End x (7) 3/4" Dead End Water Hoss Manifold, Hot Tub, Spa Part, 2" slip x End x (7) 3/4" Dead End Water
    Add to Cart

    Hoss Manifold, Hot Tub, Spa Part, 2" slip x End x (7) 3/4" Dead End Water

    MSRP: $25.99
    $19.99
    This part is a Hoss 2" Slip X Dead End X (7) 3/4" Barbs manifold and a single barb plug  The Manifold receives a 2" pipe on one side and then is a Dead End with (1) 3/4" Barb on the end with (6) 3/4" Barb...
    MSRP: $25.99
    $19.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $25.99
    $19.99
    Subtotal:
  • 2" Cap with 3/8" Barb, Strong Spa for Manifold 2" Cap with 3/8" Barb, Strong Spa for Manifold
    Add to Cart

    2" Cap with 3/8" Barb, Strong Spa for Manifold

    MSRP: $12.99
    $7.99
    This part is a 2" Slip cap with a 3/8" Barb on the end.. This adapter glues on the street end of a 2" Manifold or PVC plumbing fitting and a 3/8" Inside Diameter Tube glues onto the barb..  This part is found in Strong Spas and is found...
    MSRP: $12.99
    $7.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $7.99
    Subtotal:
  • Total: items /

Adding your products to cart