Jets, Jet Bodies and Related Parts

This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This Kit is a 3/8" Tubing Connect Kit with Glue for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This part is a Poly Jet Series Jet Body made by Waterway it is the Old Style Poly Jet and features on the Air Connection a 3/8" Barb and on the water connection a 1/2" Slip Ell... The Water connection will be a 1/2" Flex pipe and it will measure about...

This part is a Complete Waterway Old Faithful Jet that has a 4-3/4" hole size allows up to 175gpm of water movement the face is a Deluxe Scalloped Black.. The water glue inside connection is 2" which measures about 2 3/8" Inside Diameter and the air...

This part is a Complete Jet Body for Waterway Power Storm 5" Face Snap In Style Jets... This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. NOTE: This part has been discontinued by Waterway so stock is...

This part is a Complete Jet Internal, CMP, Typhoon 300, 3-1/4" face diameter, Directional, Crown, Dark Gray, Stainless Steel.. Note: This is a CMP Typhoon 300 Series jet and although the Waterway HTP55-270-1731 Diffuser looks similar they will...

This part is a Complete Jet Internal, Waterway, Poly Jet, Caged Straight, Gray, 2" Face Width.. This Jet is similar to the Poly Jets with the face that slips in and out except it has no face just a body..  Jet Part...

Jet Internal, Pentair, Cyclone Luxury, 4-1/8" face diameter, Pulse Nozzle, LS,, Textured, Gray This smiley face cut out in the back of the diffuser is a tell tale sign that your jet is a Cyclone Luxury Jet.. Installation Type Twist...

This part is a Threaded Poly Storm Jet Body with a 3/4" Barb.. You would seal this with Silicon along with a gasket..This part is a replacement for an obsolete Jet body but you will have to replace the jet as well to complete the repair.. The below...

This part is a 3 part Jet Internal, G & G Micro Pulse, 1-5/8" face diameter,  Twin Roto, Smooth, White... Note: These jets are new old stock and will not be perfect or bright white.. Installation Type Thread In Face...

This part is a Tee used in conjunction with a Micro Jet Body for the water connection that glues inside of the back of the Micro Jet Body and it is 3/4" Barb X 3/4" Barb Connection for the hose...  Below is a list of the parts related to this part....

This part is a 90 degree Barb used in conjunction with a Micro Jet Body for the water connection that is 3/4" Barb and Glues inside of the Bullet Jet Body...  Below is a list of the parts related to this part.. Bullet Jet Body, G & G, Micro...