XP2e 4.0 HP 2 5/8" Eye Impeller Aqua-Flo 230V 14 Amp
- SKU:
- HTP9169KC01
- Shipping:
- Calculated at Checkout
Description
This is a XP2e 4.0HP Impeller.. The Impeller has a 2 5/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V there are no 115V versions.
See the links below for seals, bearing and other parts for the XP2e Wet End..
Note: The three things you need to know to get the correct Aqua-Flo XP2 or XP2e Impeller is the Eye Width, Voltage and Amperage.. Use the chart with the Voltage and Amperage to determine the HorsePower.. DO NOT rely on the HorsePower on the pump it is usually “Overrated” not accurate.. See Chart Below.. The Eye Size Choices are 2 ⅛”, 2 ⅜” and 2 ⅝”..
This Impeller fits between the Face and the Volute of an Aqua-Flo XP2e Wet End.
Note: This Bearing has a 17mm bearing center hole; some motors on Aqua-Flo pumps have a 15.9mm bearing center hole so measure before ordering.. Put a Note in the space during check out and we will ship a 15.9mm instead..
Closed Face | |
Impeller Diameter OD | 4" |
Vane Width ID | 11/16" |
Eye Diameter OD | 2-5/8" |
Eye Length | 1/2" |
Impeller Width OD | 7/8" |
Seal Seat Depth | 1/8" |
Shaft Length | 1-1/2" |
Shaft Diameter OD | 9/16" |
Seal Seat Diameter OD | 1-1/4" |
Manufacturer | AquaFlo/Gecko |
Pump Application | XP2E |