You are buying a 5.5KW Incoloy Heater Element for 230V or 115V Applications that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes. The list on this Element is $69.50. This part used in newer hot tubs and features .
Note: We do offer a (Better) Version that is Teflon Coated and a (Best) Version that is Titanium that is more resistant to Chemicals as well as salt..
Flow Thru Element, 5.5kW, Generic, 10-1/2", 115/230v, Teflon Coated
Heater Element 5.5kw Kit Hot Tub Spa Part M7 Balboa Gecko Hydroquip Titanium Kit
Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 10.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc….. On this particular heater the pressure switch is included and it can cause a no heat condition and can be purchased separately.
We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part..