Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)

(No reviews yet) Write a Review
SKU:
HTP25-40CB-BI
Shipping:
Calculated at Checkout
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
  • Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
MSRP: $69.50
$44.99
— You save $24.51

Description

This part is a Standard 4.0KW Heater element that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.

This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes.  

This part used in newer hot tubs and features.

 

Note: We do offer a (Best) Version that is Titanium that is more resistant to Chemicals as well as salt..

For that version click this link: (D) Heater Element 5.5kw Gasket Kit Hot Tub Spa Part M7 Balboa Gecko Hydroquip Titanium Silicon Kit (Best Value)

 

 

 

Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 14.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc…..
25-4041-BI-TI

 

View AllClose

Related Products