Electronic Control Systems and Parts

This part is a Vacuum Switch like you will find on some  Cal Spas in the suction side of the pump. Specs V4001P-DX Replacement, 21A, 1/8"mpt. For a switch like the original click this link: PresAirTrol Style Vacuum Switch This is a normally open...

This part is the Cord Side Male AMP Connector that houses (3) Male Pins.. The Pins are not included..   Terminal Type AMP Terminal Style AMP Plug Housing Male Number of Connections 3 Terminal Amperage 20A The other...

This sensor is no longer available.. Hi Limit Sensor

This Part is a Surface Mount Style HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing through the...

This part is an Amp Style Female Pin crimp connector that fits wire that is 14-20 Gage and is usually found on the pack or board side plug connector that is mounted on the board housing.. This listing is 25 Pins..   Terminal...

This part is a VS300 Board that operates (1) Pump and Light..   If your board has this chip number VS300FLXR1(x) with any number in the X position this board is correct.. This board is used with (4) Button Topsides..   This board can...

This item is a 1/8" MPT Brass Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or...

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. Measures 1-3/8" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    LE, Value...

This part is a Temperature Sensor found in some Jacuzzi J-Series and Sundance, hot tubs that have Curled Finger Style connector..  See the pictures for the Curley finger style examples to determine if yours is that style....

This kit is no longer available you would choose this kit: Retrofit MODPACK 202 Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet...

30A SC Buss Style Fuse Holder Fuse Part Type Fuse Holder Fuse Style SC Series Fuse Amperage 30A Mounting Box Mount

Enclosed Circuit Board RelayCoil contacts are on bottom of relay at PC board. Trace saver tabs are available at top of relay ActionCoilAmps SPST-NO 12 VDC 30amp Coil Voltage Type    DCRelay/Contactor Style  ...