Cords, Plugs, and Receptacles

This part is an Amp Style Female Pin crimp connector that fits wire that is 14-20 Gage and is usually found on the pack or board side plug connector that is mounted on the board housing.. This listing is 25 Pins..   Terminal...

This part is the Cord Side Male AMP Connector that houses (2) Male Pins.. The Pins are not included.. This connector is used often on light cables.. Terminal Type AMP Terminal Style AMP Plug Housing Male Number of...

This part is an Amp Style Male Pin crimp connector that fits wire that is 14-20 Gage and is usually found on the pump or other accessory side plug connector that is mounted on the cable.. This listing is 25 Pins..   Terminal...

Mini Size Pump Female Receptacle4 leads, 9" long, 14 AWG

This part is a 31" AMP Style 4 Wire Cord With Male Plug that is used on a 2 speed pump.. The Wire colors are as follow on most systems: Red=High Speed Black=Low Speed White=Neutral or Common Green=Ground There are exceptions to these colors versus...

This part is a 4 pin female side Amp connector 20 Amp . This part is normally found on the control pack side mounted for the male amp cord that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...

AMP Plug Housing Male Cord Side 4 Pin 20 amp style. Note: This plug does require a tool to remove the pins to change this plug housing...   Terminal Type AMP Terminal Style AMP Plug Housing Male Number of...