Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3"

(No reviews yet) Write a Review
SKU:
HTP34-402-1250
Shipping:
Calculated at Checkout
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3" The Suction and Pressure sides both Measure about 3" Across the threads!
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3" This XP2e Wet End will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts.
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3"
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3" This XP2e Wet End will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts.
  • Complete Wet End, Aqua-Flo ,XP2, Xp2e, 1.5HP, 2"x 2" , 56fr, fits Motors with 9.0A/230V 6.3" The Suction and Pressure sides both Measure about 3" Across the threads!
  • You can turn this wet end to 12 o’clock
  • You can turn this wet end to 3 o’clock
  • You can turn this wet end to 9 o’clock
  • This XP2e Wet End will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts.
  • This XP2e Wet End will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts.
MSRP: $148.99
$129.99
— You save $19.00

Description

This part is a Complete XP2e 6.3” 1.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2e pumps. This wet end is used with a 56 frame motor that would have about 9.0 Amps on High Speed on a 230V motor and not available for a 115v motor. The motor used may be either a single or dual speed. The wet end may be rotated 90 degrees to change the discharge position. The complete wet end includes: the volute, seal, impeller, wear ring, suction cover, suction cover o-ring, drain plug, drain plug o-ring and suction cover screws.

 If you need a barb for the front of your wet end where a small hose connects here are choices for those Barbs with or without sealer.. I always seal these with silicon Pipe tape does not work well on these fittings:

 Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP

Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

Note: You always base your choice of HP on the Amperage of the motor it is going on see the chart below.. a 48 frame motor measures about 5 1/2" across the motor and will have 1/4" heads on the thru-bolts and will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts and will measure about 5 7/8" between the thru-bolts in a cross pattern..

 
Related Parts:
 

 Horsepower VS Amperage Chart

All of these numbers are approximate but will be very close..
115v
.75HP=10Amps
1.0HP= 12Amps
1.5HP=14Amps
2.0HP= 16Amps
 
230V
1.0HP= 8.0 Amps
2.0HP=10.0 Amps
3.0HP=12.0 Amps
4.0HP=14.0 Amps
5.0HP-16.0 Amps
 
 

Pump to Motor Foot Types 14
Motor Frame 56 Frame Thru-Bolt
Drain Plug Location 4,6,9 o`clock
Suction Auxillary Port None
Suction Style Center
Suction Connection (Physical Dimension) 3-1/16"od
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Auxilary Port None
Discharge Style Side
Discharge Connection (Physical Dimension) 3-1/16"od
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 1.5hp
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master XP2e
Manufacturer Impeller Number 91695150
Volute Fastening Type 8 Screws
 
View AllClose

Related Products