Cal Spa Dually to Single Pump Retrofit Kit with How To Video

(1 review) Write a Review
SKU:
HTPDuallyRetroKit
Shipping:
Calculated at Checkout
  • This is a complete Cal Spa Dually to Single Pump Retrofit Kit. What the Video to get and idea of how to install this kit..
  • This kit is used to remove this style pump and replace it with a Single Pump.. This pump is no longer available..
  • In this picture you see the Wye connector that is used to tie both of the pressure side pipes together and make the single pump power both sides..
  • This part of the kit is used to plumb between the right side of the heater to the pump pressure side...
  • This part is glued together and used on the left side the heater before the wye connector..
  • You Use this Part to plug the left suction fitting and glue your old dually pump bleeder line onto this to keep water moving through this part of the plumbing..
  • This part of the kit is used to plumb between the right side of the heater to the pump pressure side...
  • In this picture you see the Wye connector that is used to tie both of the pressure side pipes together and make the single pump power both sides..
  • In this picture you see the Wye connector that is used to tie both of the pressure side pipes together and make the single pump power both sides..
  • In this picture you see the Wye connector that is used to tie both of the pressure side pipes together and make the single pump power both sides..
  • This part is glued together and used on the left side the heater before the wye connector..
  • In this picture you see the Wye connector that is used to tie both of the pressure side pipes together and make the single pump power both sides..
  • This part of the kit is used to plumb between the right side of the heater to the pump pressure side...
  • This part is glued together and used on the left side the heater before the wye connector..
  • This part of the kit is used to plumb between the right side of the heater to the pump pressure side...
  • This is a complete Cal Spa Dually to Single Pump Retrofit Kit. What the Video to get and idea of how to install this kit..
MSRP: $169.99
$139.99
— You save $30.00

Description

This kit is used to change from a Cal Spa Dually Pump setup to a single Pump set up since the dually pump has been discontinued.. You will have to modify the plumbing and note that this kit is for most applications and may not be all inclusive.. If you need more plumbing to finish this kit that can be ordered here or you can get 2" parts at your local hardware store... This kit features (3) 2" Heater Unions with gaskets, (1) 2" Slice Valve, (1) 2" Pump Union, (1) 2" Street x Slip 90 Ell, (1) 2" Street Sweep 90 Ell, (7) 2" Street x Slip 45's, (2) 2" Couplers, (1) 2" Wye, (2) 12" 2" Flex Pipe, (1) 2" to 1" Bushing and a (1) 1" to 3/8" Barb and lastly a 3/8" Pump Barb with a tube of Silicon... Watch the attached Video for how to install this kit...

 

When you replace a dual pump with a single you need a higher amperage pump and this will in most cases give you similar power and in some cases more power..

Below are Pumps that would be good choices to replace the Dually along with this kit...   

You will most likely need a Pump Cable for the new pump to the pack you can find those here: Male, Amp, Pump Cord, (2) Speed, 14 Gage, 4 Wire, 31" , Red, Black, White, Green

 

Complete Pump, Aqua-Flo, XP2e,4.0HP ,230v, 56fr, 2"x 2, 1 or 2 Speed 15A

Spa Hot Tub 56Fr Guangdong LX Pumps 2" X 2" 4.0HP 2 Speed 230V WUA Video How To

Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2", OEM 

 

This kit requires some ability to measure and cut plumbing and have some imagination in how you install the kit....

View AllClose

1 Review

  • 5
    It Worked

    Posted by Mike on Sep 17th 2017

    HAD ALL PLUMBING PARTS NEEDED WITH SOME PARTS LEFT OVER. ON LINE VIDEO WHICH WAS NOT REFERENCED IN THE KIT WHEN IT ARRIVED DESCRIBED IN DETAIL HOW TO PROCEED. MY TUB HAPPENED TO BE AN EXACT MATCH FOR THE ONE IN THE VIDEO. THE ELECTRICAL CONNECTORS TO ATTACH THE CORD TO THE NEW MOTOR REFERENCED IN THE VIDEO AS INCLUDED IN THE KIT WERE NOT IN THE KIT. THE PRICE SEEMED A BIT HIGH FOR SOME PVC CONNECTORS AND HOSE BUT THE INSTRUCTIONS WERE PRICELESS.

View AllClose