Hot Tub Parts of America

This part is a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold. The Manifold recieves a 1" pipe on one side and then slips into a 1"...

This tool is a Clam Shell Style Bearing Puller Clam Shell that you put over the bearing and use a puller to pull the bearing off the pump motor shaft... This tool works on 6203 style bearings only.....

This part is a CMP 2" Diverter Stem. This Diverter Stem is about 7/16" Wide sticking through the diverter cap. The Diverter Valve that this part fits is used to Divert Water into...

This part is a 1 1/2" Spigot X 1 1/2" Slip Slice gate Valve and 1 1/2 X 2" Heater Union with Gasket or Oring that matches Union. The Valve receives a 1 1/2" pipe...

This part is a 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valve and 1 1/2" Heater Union with Gasket or O-Ring that matches the Union. The Valve receives a 1 1/2" pipe or...

This part is a 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valve. The Valve receives a 1 1/2" pipe or fitting (Which is about 1 7/8" outside diameter) on one side and then slips inside of a 1 1/2" fitting...

You are buying a Kit that consists of a 2" Spigot X 2" Slip Slice Gate Valve and a 2" Pump Union with Gasket or Oring that matches Union. The Valve receives a 2" pipe...

This part is a 2" Spigot X 2" Slip Slice Gate Valve. The Valve receives a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on one side and then slips inside of a 2"...

This part is a Kit that consists of (1) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valve and (1) 1 1/2" Pump Union with Gasket or O-Ring that matches Union. The Valve receives a 1...

This part is a (2) Hot Tub Spa Old Style Manifolds glued together that is 1 1/2" Slip on one end and 1 1/2" Street on the other end with a dead end knock out.. In other words the Street end has a...

This part is (1) Hot Tub Spa Old Style Manifold that is 1 1/2" Slip on one end and 1 1/2" Street on the other end with a dead end knock out.. In other words the Street end has a blocked off plug that...

This part is a 1" Slip X 1" Spigot X (12) 3/8" Barbs Air Manifold. The Manifold recieves a 1"ID or 1 5/16" OD pipe on one side and then slips into a 1 5/16"...