Air Venturi System Parts

This part is a Air Manifold, 3/8" Barb, 6 Port, Flow Thru, 1/2" Slip on both ends..The outside of each end could be considered 3/4" Spigot but it is really a tight fit.. Barb/Port Size 3/8" Barb Port Type Barb (b) Number of...

Top Draw Air ControlPart only

This fitting is a 90 degree glue in style spigot x barb. The Spigot side will glue into a 1" fitting that measures about 1 1/4" Inside Diameter and the barb accepts a 3/4" inside diameter hose usually a clear hose. These are usually used on water control...

4-port manifold with (4) 3/8" barbs and 1" Slip x 1" Street inlet/outlet   Barb/Port Size 3/8" Barb Port Type Barb (b) Number of Ports 4 Manifold Fitting Type Flow-Thru Manifold Plumbing Size "A" 1" Manifold Plumbing Type "A" Slip (s),...

This part is a Hydro Air 1" Top Draw Air Control Stem Assembly only.. It measures about 2 5/8" Across the top and the threaded hole this would screw in would be about 1 3/8" Wide.. the shaft from the bottom of the lid would be about 2 1/2".. See attached...

This is a plug used to plug off a 3/8" ID Tube. It wil glue and slip inside of the hose to plug it off. We offer many different plugs based on the brand of manifold.

This is a 1" Spigot Plug which measures 1 5/16" OD it is used to plug off a 1" port which measures 1 5/16" ID on a manifold or other fittings. PVC Pipe Fitting Type    PlugFirst Plumbing Connection Size    1"First Plumbing...

This is a plug used to plug off a 3/8" port on Air manifolds or Air Sides of Jet Bodies that are above the water line of the tub. We offer many different plugs based on the brand of manifold.

This part is a Barb Adapter 3/4" Barb x 1" Street or 3/4" Inside Slip..

This item is a Barbed Coupling used to couple 3/8" ID hose together. An example would be the air line on a Pump Bleeder, Jet Body or Air Manifold..   For other 3/8" related items click this...