Air Venturi System Parts

This part is a (1) 1 1/2" Slip X 1" Slip Coupler PVC Plumbing Fitting. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1" fitting which measures 1 1/4" OD on the other side...

This is a 1" Slip x Spigot Plug which measures 1 5/16" OD on one end and 1 5/16" ID on the other side it can be used to plug off a 1" Slip port which measures 1 5/16" ID on a manifold or other fittings or Cap a 1" Slip fitting that would measure about 1...

This is a Set of (3) barb plugs used to plug off a 3/8" port on Air manifolds or Air Sides of Jet Bodies that are above the water line of the tub. We offer many different plugs based on the brand of manifold.

This part is a Manifold that features (6) 3/8" Barbs and is Flow Thru, 1-1/2"slip x 1-1/2"spigot.. To plug the barbs you can use these plugs: Barb Plug 3/8" Slip for Air Manifold and more Waterway Set of (3) Barb Plugs 3/8" Slip for Air Manifold and...

This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps. (2) 1" Street x 3/4" Barb Couplers and (2) 1" Couplers.. This Kit is used to connect your 1" pipe connection that is being replaced to a more modern outside barb type seal... You...

This part is a 90 degree slide on glue in style 1" slip adapter fitting. This fitting slides onto a 1" air control valve before you glue any plumbing to the bottom of the valve and then it gives you a 1" slip fitting on the side in a 90 degree fashion....

This part is a Replacement "B/C" Coupling for air jet spa for all some Saluspa or Lay-Z-Spa AirJet™ Hot Tub models (Siena, Miami, Havana, Paris, Palm Springs Air Jet, New York, Vegas, Saint Tropez, Hawaii and Monaco). If the "B/C"...

This part is aTop Draw Style Air Control with a Smooth White Top that measures about 2" wide it requires a 1 1/8" wide hole in the tub to be mounted and accepts a 1/2" slip pipe or fitting in the bottom.   There is a similar version of this...

This part is a 3" wide Air Valve Handle in Gray that fits some Dynasty Air Valves.  This Diverter handle Slides on the Air Control Valve Stem that measures about 1/4" and is used to operate the Air Valves and is for Dynasty Spa only. The...

This part is a 3" wide Air Valve Handle in Black that fits some Dynasty Air Valves. This handle Says Trevi instead of Dynasty but they are exactly the same.. Dynasty sent us Trevi instead of Dynasty because they  This Diverter handle...

This part is a Complete Black Notched Air Control Valve made by Waterway with a Plunger Style System.. The glue fitting is 1" Slip which will accept a 1" pipe or fitting that would measure about 1 1/4" Outside Diameter.. If you only need t replaced the...

This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...