Air Injectors

You are Buying 2X Waterway Spa Hot Tub 1 1/4" Air Jet Face, Flange Style Fittings with 3/4" Thread Injector Part. This Part is installed by adding clear silicon to the flange and screwing the flange into the jet body using an allen wrench. ...

(25) Tubing Clamps, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Links to related parts: (1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for...

(1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Self-compensating hose clamp expands/contracts with temperature change Cannot be over/under...

This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...

This part is a 10.2oz tube of 100% RTV Silicone Sealer that is specially formulated for hot tub fittings when sealing a fitting to the hot tub shell acrylic or poly... We use this Large tube for jobs like 10-15 fittings, Light Lenses or waterfalls and...

This part is a 3.0oz tube of 100% RTV Silicone Sealer that is specially formulated for hot tub fittings when sealing a fitting to the hot tub shell acrylic or poly... We use this Medium tube for jobs like 3-4 fittings, Light Lenses or waterfalls and such...

This part is a 1/2oz tube of 100% RTV Silicone Sealer that is specially formulated for hot tub fittings when sealing a fitting to the hot tub shell acrylic or poly... We use this small tube for small jobs like one fitting or sealing heater element nuts...

You are Buying 10 Waterway Spa Hot Tub 1 1/4" Air Jet Face Kit, Flange Style Fittings with 3/4" Thread Injector Part with a .5 Oz of Clear Silicone Designed specifically for Hot Tub Parts. This Part is installed by adding clear silicon to the flange...

Waterway PlasticTop-Flo air injector. 1-3/16" hole size required for installation

This part is a Jet Body that is used as a combination water and air or just an air blower jet body.. In the water and air application you will need an additional way to connect to the jet body... This ways could be a 3/4" coupler of 90 or some of the...

This part is an Air Injector Connector, HydroAir, 3/4"spigot x 3/8"barb. This part receives a 3/4" Flex pipe in the spigot side that would measure about 1" Outside diameter and then a 3/8" Inside Diameter Vinyl tube on the barbed side....

Waterway PlasticSide output LO-PRO injector. 3/4" hole required for installation