Electronic Control Systems and Parts

This part is a 72" AMP Style 3 Wire Cord With Male Plug that is used on a 1 speed pump or blower.. Note: To use this cable with a blower you will cut the spade connector off the end off the end and attach with crimp connectors.  The Wire colors are...

This part is a 60" AMP Style 3 Wire Cord With Male Plug that is used on a 1 speed pump or blower.. Note: To use this cable with a blower you will cut the spade connector off the end off the end and attach with crimp connectors.  The Wire colors are...

This part is a Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 96" Long, Plug Attached, w/Terminated Ends. The Wire colors are as follow on most systems: Red=High Speed Black=Low Speed White=Neutral or Common Green=Ground There are exceptions to these...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

HydroQuip Temperature Sensor, 72" with 1/4" diameter temp probe. Common to find these used on the Versi Heaters and 9700 series spa controls. Please Note: This 2 wire sensor will replace all previous 3 wire styles. For SSPA, USPA, MP, 6200, 9200, 6500,...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

The next generation feature rich Balboa BP7 control system with a 5.5KW heater bundled with the sleek rounded rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system,...

Popular plastic presssure switch for use with many brands of hot tubs and spas. Common to find thsi switch on Cal Spas and some ACC control systems. Comes preset at 1.5 psi but is field adjustable from 1-11 psi. Be sure to add teflon tape to your threads...

MBP501UX replacement Spa pack control system for some Artesian spa models made by Balboa Water Group. This replacement equipment pack comes setup to support multiple models with various equipment. Replaces the MBP501P3, 56407, 33-1310-08, 33-1312-08,...

This part is a Balboa Circuit board for a Artesian Spa with MBP20P5R1A on the board tag.. The compatible topside would be a MOLEX system plug not a phone plug.. The original board number would have been 56346 this is the newest version.. Note: The...

This part is a Coleman, Maax, Vita Spa, PC Board, Balboa, MX504SZR1A, (2) Pump System and a Blower Or 3 Pumps..  Light and a Circulation Pump if equipped.. COLEMAN CIRCUIT BOARD 8 PIN PHONE STYLE CONNECTOR CHIP NUMBER MX504SZR1(X) This board is used...

This part is a PC Board, Balboa, LPI501ST, (2) Pump System, Energy Saver, 480-0152 and others. This Board operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump. Replaces the circuit board LPI501ST for Balboa Control System 56704...