Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v .8Amp/230V

(No reviews yet) Write a Review
SKU:
HTP310-KE70
Shipping:
Calculated at Checkout
  • Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v .8Amp/230V The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done...
  • Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v .8Amp/230V The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done...
  • Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v .8Amp/230V The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done...
  • Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v .8Amp/230V The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done...
  • Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v .8Amp/230V The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done...
MSRP: $159.99
$129.99
— You save $30.00

Description

This part is a Complete Verticle Mount Style Waterway Iron- Might or Uni-Might 1/15thHP Wet End that is 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Adjustable Suction Side discharge 48 frame wet end for FMVP pumps only. 

This wet end is used with a 48 frame motor that would have about 1.4Amps on a 115V Motor or .8 on a 230v. The motor used is a single speed only. The wet end Suction fitting may be rotated 90 degrees to change the Suction position.

The complete wet end includes: the volute, seal, impeller, wear ring, suction cover, suction cover o-ring, drain plug, drain plug o-ring and suction cover screws.

Note: You always base your choice of HP on the Amperage of the motor it is going on see the chart below.. a 48 frame motor measures about 5 1/2" across the motor and will have 1/4" heads on the thru-bolts and will measure about 5 3/16" between the thru-bolts in a cross pattern and 56 frame motor measures about 6 1/4" across the motor and will have 5/16" heads on the thru-bolts and will measure about 5 7/8" between the thru-bolts in a cross pattern..

 
 
View AllClose

Related Products