Wavemaster 8200 Complete Pumps

Wavemaster 8200 Complete Pumps

Wavemaster 8200 Complete Pumps

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Screw Kit for Pump Motor Base Base 48 & 56 Frame Note: We do offer this Screw kit with a Rubber Vibration Dampener in this Store..
    Choose Options

    Screw Kit for Pump Motor Base Base 48 & 56 Frame

    MSRP: $9.99
    $6.99
    This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs. . Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  Note: Rubber mount not included in this listing it can...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener
    Add to Cart

    Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener

    MSRP: $23.99
    $17.99
    This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...
    MSRP: $23.99
    $17.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $23.99
    $17.99
    Subtotal:
  • Stronger Pump Bleeder Barb Kit, Fits Watkins, Wavemaster, XP2, XP2E, LX, 1/4" Barb x 1/4"Nptt This barb will take the place of the barb on the right but is much stronger and less likely to break..
    Add to Cart

    Stronger Pump Bleeder Barb Kit, Fits Watkins, Wavemaster, XP2, XP2E, LX, 1/4" Barb x 1/4"Npt

    MSRP: $16.99
    $10.99
    This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....
    MSRP: $16.99
    $10.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.99
    $10.99
    Subtotal:
  • Pump Bleeder Barb, Watkins, Wavemaster, LX, 1/2" Barb x 1/4" Mpt, Tapered Style The Left style uses and O-ring and the right side requires a sealer like Silicon.. Links to both are in the desertion area of this part..
    Add to Cart

    Pump Bleeder Barb, Watkins, Wavemaster, LX, 1/2" Barb x 1/4" Mpt, Tapered Style

    MSRP: $13.99
    $9.99
    This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...
    MSRP: $13.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $9.99
    Subtotal:
  • 39577 Aqua-Flo Impeller & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081 39577 Aqua-Flo Impeller & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081
    Add to Cart

    39577 Aqua-Flo Impeller & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081

    MSRP: $58.99
    $48.99
    This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...
    MSRP: $58.99
    $48.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $58.99
    $48.99
    Subtotal:
  • Pump Bleeder Barb, LX, 1/2" Barb x 1/4"Mpt Fits some Watkins, Wavemaster Pump Bleeder Barb, LX, 1/2" Barb x 1/4"Mpt Fits some Watkins, Wavemaster
    Add to Cart

    Pump Bleeder Barb, LX, 1/2" Barb x 1/4"Mpt Fits some Watkins, Wavemaster

    MSRP: $18.99
    $14.99
    This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...
    MSRP: $18.99
    $14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $18.99
    $14.99
    Subtotal:
  • Pump Bleeder Barb, XP2, XP2E, LX, 1/4" Barb x 1/4"Mpt fist some Watkins Pump Bleeder Barb, XP2, XP2E, LX, 1/4" Barb x 1/4"Mpt fist some Watkins
    Add to Cart

    Pump Bleeder Barb, XP2, XP2E, LX, 1/4" Barb x 1/4"Mpt fist some Watkins

    MSRP: $15.99
    $11.99
    This part is a Pump Bleeder Barb fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...
    MSRP: $15.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.99
    $11.99
    Subtotal:
  • Fits Some Watkins Hot Spring, Impeller, (2) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081 Fits Some Watkins Hot Spring, Impeller, (2) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081
    Add to Cart

    Fits Some Watkins Hot Spring, Impeller, (2) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081

    MSRP: $99.99
    $78.99
    This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal, (2) Bearing & Impeller Kit with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...
    MSRP: $99.99
    $78.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $99.99
    $78.99
    Subtotal:
  • Fits Some Watkins Hot Spring, Impeller, (1) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081 Fits Some Watkins Hot Spring, Impeller, (1) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081
    Add to Cart

    Fits Some Watkins Hot Spring, Impeller, (1) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081

    MSRP: $84.99
    $68.99
    This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal, (1) Bearing & Impeller Kit with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...
    MSRP: $84.99
    $68.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $84.99
    $68.99
    Subtotal:
  • Fits Some Watkins Hot Spring, Vendor Code 4081, Face, O-Ring, Wet End ,6" Inside Diameter, 1/8" Thick
    Add to Cart

    Fits Some Watkins Hot Spring, Vendor Code 4081, Face, O-Ring, Wet End ,6" Inside Diameter, 1/8" Thick

    MSRP: $9.99
    $6.99
    Watkins Vendor Code 4081 Older Style Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200... 48Frame Pump Face O-Ring Only fits around the Face of this Pump Face... There are (2) Different versions of the Face plate O-Ring on the Xp2 Wet Ends.. The...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • 2 1/8" Wear Ring, Watkins,  Vendor Code # 4081, Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200 2 1/8" Wear Ring, Watkins,  Vendor Code # 4081, Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200
    Add to Cart

    2 1/8" Wear Ring, Watkins, Vendor Code # 4081, Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200

    MSRP: $16.99
    $12.99
    This Part is a 2 1/8" wear ring that is used between the impeller and the wet end face on Watkins Vendor Code # 4081, Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200.. This wear ring serves as a seal between the suction and pressure sides of the...
    MSRP: $16.99
    $12.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.99
    $12.99
    Subtotal:
  • 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket... 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket...
    Add to Cart

    2 5/8" Lip Hot Tub Spa 2" Heater or Pump Union Gasket CMP Video How To

    MSRP: $7.99
    $4.99
    This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...
    MSRP: $7.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $7.99
    $4.99
    Subtotal:
  • Total: items /

Adding your products to cart