Watkins, Impeller & Seal Kit, 1.65 HP, 2 1/8" Eye, Vendor # 4081, Wavemaster, 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101
- SKU:
- HTP91694BKEasealkitWM
- Shipping:
- Calculated at Checkout
-
Watkins, Impeller & Seal Kit, 1.65 HP, 2 1/8" Eye, Vendor # 4081, Wavemaster, 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101
-
Watkins, Impeller & Seal Kit, 1.65 HP, 2 1/8" Eye, Vendor # 4081, Wavemaster, 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101
-
Watkins, Impeller & Seal Kit, 1.65 HP, 2 1/8" Eye, Vendor # 4081, Wavemaster, 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101
-
Watkins, Impeller & Seal Kit, 1.65 HP, 2 1/8" Eye, Vendor # 4081, Wavemaster, 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101
-
Watkins, Impeller & Seal Kit, 1.65 HP, 2 1/8" Eye, Vendor # 4081, Wavemaster, 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101
Description
This is a 1.65HP Seal Kit & Impeller for Watkins, Vendor # 4081, Wavemaster Pumps.
This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers 06115734-1, 39583, 0974001, 1431701-01, 36745, 36675, 71699, 0974101..
Impeller Diameter OD | 4" |
Vane Width ID | 5/16" |
Eye Diameter OD | 2-1/8" |
Eye Length | 11/16" |
Impeller Width OD | 9/16" |
Seal Seat Depth | 1/8" |
Shaft Length | 1-1/2" |
Shaft Diameter OD | 5/8" |
Seal Seat Diameter OD | 1-1/4" |
Manufacturer | Watkins Vendor Code 4081 |
Pump Application | XP2 |
2 Reviews
-
Worked great, pump restored!
Easy to do and way cheaper than replacing a complete pump. The entire project took about 45 minutes (not counting refilling the tub). The part number of the pump on my tub is: Watkins, pump model 0974101, 1.65 HP frame 48. Highly recommend this as opposed to replacing the entire pump
-
Right parts, easy install, works
I watched the rebuild video. It was accurate in every detail. I asked if I had selected the right parts, they responded that I had (on their chat tool, quick response) The parts came quickly. Installed easily. work properly. The only problem I had is after assembly the impeller would not turn easily. There was a little interference between the impeller eye and the inlet cover. A little material removal from the edge of the inlet cleared the problem. Thanks HTPOA