Waterfall Control Valves & Related Parts

This item is a 6 Spoke 3 5/8" Wide Diverter Knob for a 1" Waterfall or Neck Jet Control.. The outside measurement is about 3 5/8" and the center hole is about 1/2".. NOTE: There is an Air Control version of this know that measures about 3 1/4" wide...

This item is a 3 5/8" wide 6 Spoke Watefall or Neck Jet Control Diverter Knob, Diverter Cap and O-ring Kit for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small...

Two tone Marquis Spa 1" on/off valve for the neck jets. This assembly includes cap, handle, valve ste, body and all o-rings to either transfer to your existing plumbing or to replumb completely. If replumbing you may need 1" to 3/4" barbed adapters. The...

This part is a Waterway Water Feature Arc Style Fountain with 2 1/8" Face in Dark Silver Glitter.. This part is a Topmount style with a 3/4" Barb..  If you need the parts inside of this or the cap they are not sold seperately.. 

This part is a Star Handle Valve , Waterfall or Neck Jet Control, On/Off Valve, Silver and Graphite, 1" Slip x 1" Slip, Single Port.. To connect the valve to 1" plumbing simply glue inside of each Slip ports which would measure about 1 1/4" ID and we...

This part is a "S" Handle Valve , Waterfall or Neck Jet Control, On/Off Valve, Silver and Graphite, 1" Slip x 1" Slip, Single Port. To connect the valve to 1" plumbing simply glue inside of each Slip ports which would measure about 1 1/4" ID and we will...

This part is a 2 1/4" Wide cap  1"slip x 1"slip x 1"slip Notched Spa Small Diverter Complete Assembly Gray Valve.  This Valve can be found on a few brands but is a very rarely used valve... You may have a Waterfall Control valve...

This part is a Set of (5)  3/4" Barb x 3/4" Smooth Barbed Couplings used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the...

Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing with (1) 3/8" x 3/8" Barbed Coupler and 4oz of Blue Glue.. This kit is used to Connect the 3/4" Barbed...

This Kit is designed to repair a Artesian Waterway Pop Up Style Waterspout Fountain Top that has a pre-made Gasket that goes bad.. You cannot buy the gasket you have to buy the whole fountain or use this kit to repair it.. Watch the Video to see how...

This 1" Waterfall Control Plunger and Cap Replacement Kit is found in some 1" Waterfall or Neck Jet Control valves. This kit features the Cap, plunger and stem, The Gasket for the bottom of the plunger and clip that holds the stem inside the cap and an...