Balboa Topsides and Parts

This part is a topside that is used on Balboa Heat Recovery Jacket systems found in many brands of Hot Tubs like Dreammaker... It features Warm, Cool, Jet and Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is...

This topside is obsolete. We recommend installing a new retro-fit system like this: Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Remote Heater, TP200T Balboa 2 button Lite Digital topside control made for many Lite Leader control...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

The following circuit board(s) are compatible with the above topside: 59-138-1037, 59-138-1046, 59-138-1680, 59-138-1683Overlay part number 58-138-1255

Balboa no longer makes this topside control, it has aged out. We recommend installing a new retro-fit control system like this one for example: Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Heater, TP200T   Analog topside control...

This part is sadly obsolete and there are no replacements.. This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons.....

3 button Mini Oval topside control panel made by Balboa. This topside is also known as the VL200 and been used industry wide. This 3 button panel has a button for jets, light and temp up/Down. It measures 4-3/8" x 1-5/8" and requires a hole size of...

This Part is a Back Light Bulb for a Balboa Topsides only. Backlight Bulb Used In Balboa Water Group Digital Topside Controls Series 701 and 724 You will need a Small Flat Screwdriver to remove and install this bulb. Note: Not all Balboa Topsides have a...