Balboa Topsides and Parts

This topside is Obsolete the replacement for it can be found here: 4 Button, E4, VL400, Topside, Balboa, Without Overlay This part is a 4 Button, E4, Topside, Balboa, Lite Duplex Digital, (1) Pump, (1) Blower, Temp, Light.. This Topside will work...

You are buying a Balboa Generic 3 Button Overlay for a Topside for a Single Pump with  Light. This Overlay can be used to replace your original Overlay with your brand on it as long as the button configuration works out. On the overlay starting...

This part is a topside that is used on Balboa Heat Recovery Jacket systems found in many brands of Hot Tubs like Dreammaker... It features Warm, Cool, Jet and Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is...

This Topside is a Balboa Lite Leader, 2 Button, 6 Conductor, 7ft Cord also found under the name Hydro-Quip, Eco L, Silver-B.. This topside will work in place of the original Balboa numbers: 51499 50821 51705 52223   Topside...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

The following circuit board(s) are compatible with the above topside: 59-138-1037, 59-138-1046, 59-138-1680, 59-138-1683Overlay part number 58-138-1255

Analog Duplex PanelThis panel replace duplex product and utilize a "phone plug" type connector, 8 cord length. Topside Type    ElectronicTopside Complete    Complete TopsideManufacturer    Balboa Water...

This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons... You will also find a similar size and shape and look topside...

Overlay part number 58-138-1249

This Part is a Back Light Bulb for a Balboa Topsides only. Backlight Bulb Used In Balboa Water Group Digital Topside Controls Series 701 and 724 You will need a Small Flat Screwdriver to remove and install this bulb. Note: Not all Balboa Topsides have a...