Digital Electronic Topside Controls

This TSC-8 or K-8 control panel will work with most SSPA and MSPA systems and is a direct replacement for K-16 , K-52 , K-8 , TSC-52 , TSC-8-GE2 as well as others, has 7 buttons including an Economy mode, and will control dual pumps and an air blower. It...

This part is an 11 button Gecko Aeware topside complete with a 10ft cord that is used in systems base on the IN.K600 part number.. Dimensions 4-1/4" x 8-11/16" With its stunning design, Aeware by Gecko's new in.k600 advanced control panel features a low...

This part is a Balboa Topside VL700S Control Panel for 2 Pumps, Blower with Lights and a Phone Plug. This has 7 buttons Top Row: Temperature Warm, Light, Blower. Bottom Row:  Mode, Temperature Cool, Jet 1 and Jet 2. Measurements of this Balboa...

This topside is a TSC-4 or K-4, 8 button featuring up to (2) pumps and a Blower if your tub is equipped with these items.. This topside also works as a direct replacement for a K-73 topside that is shaped like a fish used on some 2006 Artesian brand tubs...

This part is a Duplex Digital and Super Digital/M-1 Board.. This board requires a 120v power supply and can work with any Duplex Digital. Balboa circuit boards are marked with a ÒChip NumberÓ that is located on a white label placed on the...

This Topside is a Balboa Lite Leader, 2 Button, 6 Conductor, 7ft Cord also found under the name Hydro-Quip, Eco L, Silver-B.. This topside will work in place of the original Balboa numbers: 51499 50821 51705 52223   Topside...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

This M-1 54091 circuit board is obsolete. You will need to move to a retro-fit control system. Duplex Digital and Super Digital/M-1 Replacement BoardsThis board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa...

Analog topside control panel made by Balboa wuth a single multi function button for pumps and lights as well as a thermostat knob for setting heat. Jacuzzi used this panel on their big box outlet spas such as the H136 and H276. Can also be found on some...

This circuit board has been discontinued. You will need to install a new retro-fit control system, see below for choices but be sure to verify these have the correct support for your model:Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...