Digital Electronic Topside Controls

Overlay sticker only for the Master Spas ST Mini Trapezoid topside control panel used in H2X Fitness Series Swim Spas. The topside that matches this overlay can be found here: Master Spas ST Mini Trapezoid Touch Panel Topside Control, No...

Extension cable in 7 foot for the Balboa BP spa packs and control systems with 4 pin Molex plug. One end plugs into the existing cable and the other end goes to the circuit board. Manufacturer Balboa Water Group Cord Connector Type Molex,...

Topside Extension, 10 foot for the ACC Smartouch, ePack and Modpack topside control panels. This topside ribbon cable extension includes a male and female end to connect from your existing topside to the circuit board. No need to splice or cut. Works...

Topside Extension, 5 foot for the ACC Smartouch, ePack and Modpack topside control panels. This topside ribbon cable extension includes a male and female end to connect from your existing topside to the circuit board. No need to splice or cut. Works with...

Overlay sticker for the Coast Spas CP406U topside control panel. This heavy duty 4 button overlay sticker has a strong adhesive backing that will stick to your base topside control with ease.  The digital topside for this sticker can be found here:...

Overlay sticker only for the Master Spas ST1 "Eyeball" topside control panel used in H2X Fitness Series Swim Spas. The topside that matches this overlay can be found here: Topside Control Panel, Master Spas ST1 Eyeball / Spa Touch Mini, 15'...

Topside adapter plate for the ACC Smartouch and Modpack KP2020, KP2010, KP2010DP, KP2020TP and the KP2005 models. This adapter plate will cover a larger hole when installing a new retro-fit control system upgrade. Outside Measurements = 9" x 4" Inside...

Topside adapter plate for the ACC Smartouch and Modpack KP1000, KP1000DP and the KP1005 models. This adapter plate will cover a larger hole when installing a new retro-fit control system upgrade. Outside Measurements = 9" x 4" Inside Measurements = 4.65"...

This part is a Balboa Original Version 4 Button Overlay for a MVP260 Topside for a Pump and a Light. This Overlay can be used to replace your original Overlay no matter what brand as long as the button configuration works out. On the overlay starting...

Overlay sticker for the Balboa TP700 topside controls that have three pumps. The buttons on this overlay are marked as Jet, Jet2, Jet 3, Light, Aux on the left and 4 directional keys and program button on the right. Manufacturer Balboa Water...

Overlay sticker for the Balboa TP700 topside controls that have two pumps. The buttons on this overlay are marked as Jet, Jet2, Light, Aux on the left and 4 directional keys and program button on the right. Manufacturer Balboa Water...

Transformer for Sundance and Jacuzzi based LX circuit boards. This 115/230 volt transformer has a step down voltage of 12 Volts. The purpose of this transformer is to energize the circuit board to power low voltage items like the processor, relay coils,...