Topside Controls (Control Buttons)

This M-1 54091 circuit board is obsolete. You will need to move to a retro-fit control system. Duplex Digital and Super Digital/M-1 Replacement BoardsThis board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa...

Analog topside control panel made by Balboa wuth a single multi function button for pumps and lights as well as a thermostat knob for setting heat. Jacuzzi used this panel on their big box outlet spas such as the H136 and H276. Can also be found on some...

This circuit board has been discontinued. You will need to install a new retro-fit control system, see below for choices but be sure to verify these have the correct support for your model:Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...

This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons... You will also find a similar size and shape and look topside...

The VS300 circuit boards have been discontinued. We now send the VS501Z circuit board which has a few more receptacles but is the same otherwise in fit and programming. This part is a VS300 Board that operates (1) Pump and Light..If your board has this...