Topside Controls (Control Buttons)

You are buying a Balboa Topside VL900S Control Panel. This topside has 12 buttons total... Note: This topside was made to be used on a LA Spa Swim Spa per the overlay but the overlay can be changed if you don't like the button configuration... I...

This TSC-8 or K-8 control panel will work with most SSPA and MSPA systems and is a direct replacement for K-16 , K-52 , K-8 , TSC-52 , TSC-8-GE2 as well as others, has 7 buttons including an Economy mode, and will control dual pumps and an air blower. It...

This part is an 11 button Gecko Aeware topside complete with a 10ft cord that is used in systems base on the IN.K600 part number.. Dimensions 4-1/4" x 8-11/16" With its stunning design, Aeware by Gecko's new in.k600 advanced control panel features a low...

This part is a Balboa Topside VL700S Control Panel for 2 Pumps, Blower with Lights and a Phone Plug. This has 7 buttons Top Row: Temperature Warm, Light, Blower. Bottom Row:  Mode, Temperature Cool, Jet 1 and Jet 2. Measurements of this Balboa...

This topside is a TSC-4 or K-4, 8 button featuring up to (2) pumps and a Blower if your tub is equipped with these items.. This topside also works as a direct replacement for a K-73 topside that is shaped like a fish used on some 2006 Artesian brand tubs...

This part is a Duplex Digital and Super Digital/M-1 Board.. This board requires a 120v power supply and can work with any Duplex Digital. Balboa circuit boards are marked with a ÒChip NumberÓ that is located on a white label placed on the...

This Topside is a Balboa Lite Leader, 2 Button, 6 Conductor, 7ft Cord also found under the name Hydro-Quip, Eco L, Silver-B.. This topside will work in place of the original Balboa numbers: 51499 50821 51705 52223   Topside...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

Duplex Digital and Super Digital/M-1 Replacement Boards This board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa M-1 system. Balboa circuit boards are marked with a ÒChip NumberÓ that is located...

Analog Duplex PanelThis panel replace duplex product and utilize a "phone plug" type connector, 8 cord length. Topside Type    ElectronicTopside Complete    Complete TopsideManufacturer    Balboa Water...

This circuit board has been discontinued. You will need to install a new retro-fit control system, see below for choices but be sure to verify these have the correct support for your model:Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...