Topside Controls (Control Buttons)

This kit is a (1) Standard Balboa Board Replacement Repair Relay along with (1) Spade to Spade Jumper and (1) Spead to Loop Jumper used to do a beef up Jumper Style repair on Some Balboa VS and EL Boards and others...  When replacing board relays...

This tool can be used to drill out the hole in the boards when changing out relays.. After you desolder a relay you can use these bits to open the holes up then slide the new relay in the holes and solder.. This also helps you to prevent damage to the...

This kit is a Set of (2) Standard Balboa Board Replacement Repair Relays along with (3) Spade to Spade Jumpers used to do a beef up Jumper Style repair on Some Balboa BP Boards and others...  When replacing board relays you may need this drill bit...

This part is a Ground Bar found on many Balboa Brand Spa Hot Tub packs as well as some Gecko SSpa and Mspa packs.

This part is a Heater M7 Sensor with a 31" wire found in Jacuzzi Premium J series 2016 to current.  Note: This sensor does not have the nut and washer on it so it will only work with Jacuzzi Premium hot tubs..   Application Balboa...

This part is a Daughter Board 1 (DB-1) Kit for Waterway NEO 2100 Spa Control System. Used to add an extra 2-Speed pump to the system.Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and (1) Zip Tie. NOTE: WE DO NOT ACCEPT RETURNS ON...

This topside is the large version of the E4 topside.. from left to right is Jet, Jet, Temp then Light.. The type is MVP260, VL260 and others.. This is an ideal replacement for Viking Brand Hot Tubs and has a 7' cord so if you need it to work on the...

This part is an optional add on to any ModPack to make the system operate a fiber optic system.. You need to let us know if your fiber box is 115v or 230v when you purchase this.. Note: This is to be purchased when you purchase a ModPack that can be...

  This part is a 3 Terminal Power Block found on some Jacuzzi or Sundance Control pack and board set ups..   Jacuzzi® Spa Terminal Block, Two Position Strip (TB1, All Models Except The J-380/J-385, J310/J-315 And J-230). Also...

This part is a 2 wire Pressure Switch Harness that fits some Balboa Boards.. Value, 2000, LE, SUV and more.. Circuit Board Application Balboa Water Group Circuit Board Type New Manufacturers Part Number LBLLC Circuit Board...

This part is an Overlay for a Balboa 12 Button Topside that is called an E12. The topside it fits is sometimes called a ML900 or E12..  Number Of Buttons - 12   Button Configuration - Time-Warm-Jet1-Jet2-Jet3-Option,...

This part is an Overlay only for a Balboa SpaTouch Rectangle shaped topside that says Menu Driven.... 5.2" wide and 4.1" Tall..