Topside Controls (Control Buttons)

This part is a Relay, Closed Style, T-90 Type, 12vdc, Coil, 30 AmpCircuit board mounted. Use to complete simple circuit board repair. Action Coil Amps SPST 12 VDC 30amp Coil Voltage Type DC Relay/Contactor Style Relay Pole/Throw Single Pole...

This part is an Overlay, Hydro-Quip Eco 1, Pump 1, Light, Temp Up, Temp Down, Small Oval This small oval label fits the Eco-1 4-button panel  Manufacturer HydroQuip Model Eco-1 # of Buttons 4 Part Type Overlay

The following circuit board(s) are compatible with the above topside: 59-138-1037, 59-138-1046, 59-138-1680, 59-138-1683Overlay part number 58-138-1255

This relay is No Longer Available.. T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repair Action Coil Amps SPST 18 VDC 30amp

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. Measures 1-3/8" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    LE, Value...

You are purchasing a Balboa Board Fuse Repair Jumper for board soldered on fuses found on many Balboa Brand Spa Hot Tub Boards. This jumper features a fuse holder with a .5A replaceable Fuse that can be added to any soldered on board fuse that has been...

This part is a 100 ft roll of Air Tubing 1/8" Inside Diameter is used with Air Buttons, Air Button Style Topsides and Air Switch Applications and between Garden Tub Pumps and Air Button Switches... Air Tubing Inside Diameter 1/8" Tubing...

T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repair ActionCoilAmps SPST 24 VDC 30amp Coil Voltage Type DC Relay/Contactor...

This Part is a Single Jumper Strap for a Balboa, EL, VS, GL or GS, Heater to Board connection.. This part is made from Copper.. Measures 2" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    EL,...

This part is (1) 1/8" X 1/8" Barbed Coupler that fits 1/8" OD , 3/16" ID Clear Hose on each side. These are used for connecting Clear Hoses together in Hot Tubs or pools and commonly used in Air Button Switch systems.

This part is a Standard Balboa Heater M7 Sensor with a 24" wire. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the sensor mount you would reuse it so...