- Home
- Electronic Control Systems and Parts
- Sensors Circuit Board
- Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
- SKU:
- HTP59-455-1201
- Shipping:
- Calculated at Checkout
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
-
This sensor is used with this type of Curley finger that goes in your connector... Note: Connector not included...
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style This sensor is used with this type of connector... Note: Connector not included...
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style This sensor is used with this type of connector... Note: Connector not included...
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
-
Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style
MSRP:
$94.99
Now:
$74.99
Was:
— You save
$20.00
Description
This part is a Temperature Sensor found in some Jacuzzi J-Series and Sundance, hot tubs that have Curled Finger Style connector..
See the pictures for the Curley finger style examples to determine if yours is that style..
This sensor is used primarily in the Jacuzzi J-Series systems, however it was also used in the Sundance 1998+ 701, 724, 2005 780/850E, 2006+ 780/680 systems as well.
Related Products


Sensor, Temperature, Sundance, 800, Jacuzzi, J-Series, Premium, Box End Style
MSRP:
$99.99
Now:
$79.99
Was:
This part is a Temperature Sensor for some Sundance and Jacuzzi Premium Hot tubs that have the Square Style Connector..
This sensor is used with following Sundance systems: 1992 Suncoast,...


O-Ring for Sensor, Temperature, Sundance, 800, Jacuzzi, J-Series, Premium
MSRP:
$9.99
Now:
$5.99
Was:
This Part is the O-ring used to seal the Temperature Sensor On Sundance and Jacuzzi Brand Hot Tubs Only..
Note: Temperature Sensor is sold separately..
The sensor this O-Ring Fits are used with...
Out of stock


Impeller, Jacuzzi, Piranha,Thera-Max,Thera-Flo,1.5hp, Sundance Jacuzzi J Series
MSRP:
$99.99
Now:
$79.99
Was:
This 1.5HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 13.5 Amps at 115V or 9.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or...
Out of stock


Impeller, Jacuzzi, Piranha,Thera-Max,Thera-Flo,2hp, Sundance Jacuzzi J Series
MSRP:
$119.99
Now:
$99.99
Was:
This 2HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 16.0 Amps on a 115V motor or 10.0 Amps on a 230V motor..... It can be found under the Name Thera-Max...
Out of stock


Impeller, Jacuzzi, Piranha,Thera-Max,Thera-Flo,2.5hp, Sundance Jacuzzi J Series
MSRP:
$154.99
Now:
$134.99
Was:
This 2.5HP Impeller fits a Jacuzzi Wet End only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on...
Out of stock


Impeller, Jacuzzi, Piranha,Thera-Max,Thera-Flo,3.0hp, Sundance Jacuzzi J Series - NLA
MSRP:
$99.99
Now:
$79.99
Was:
This 3.0HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 12.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on...


Nut, Jacuzzi, Sundance, Air Control, 780, 880, Elite Series, J-300, J-400
MSRP:
$8.99
Now:
$6.99
Was:
This part is a Nut for a Sundance or Jacuzzi brand Spa Single Air Venturi Control, found in many models..
Air Con

Hi Limit Sensor, Sundance, Jacuzzi, J-Series, 22" , Box End Style,400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880 series
MSRP:
$79.99
Now:
$64.99
Was:
This part is a 22" Hi Limit Sensor with the box style connectors..
Thi


JACUZZI® or Sundance Spa Hot Tub Diverter Stem Valve Gate J Series Premium New Style
MSRP:
$69.99
Now:
$59.99
Was:
This part is a New Style Stem Gate Valve for a JACUZZI® or Sundance Hot Tub Diverter. The old Style is obsolete.. This Diverter Stem Slides into the Diverter Valve body under the cap...