- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Relay, T-92, DPST, 30A, 115v, Coil
MSRP: $39.23$30.51Potter&BrumfieldT-92 series relays rated at 30A and are available in various actions and coil voltages. Many manufacturers are replacing large power relays with the space saving T-92 relay...MSRP: $39.23$30.51 -
Dynasty Spa Hot Tub Air Control LED Bezel and Gasket
MSRP: $13.99$9.99This part is a 3 3/8" Wide Air Valve Clear LED Bezel that fits some Dynasty Air Valves. This parts has to thread onto the air control so keep in mind if your air control is plumbed in you will...MSRP: $13.99$9.99 -
Topside Control, Sundance 850/880, 2 Pump, 11 Button
MSRP: $649.99$549.99850/880 Series topside control manufacturered for Sundance/Jacuzzi tubs and will run 2-3 Pump System w/Blower. Keypad is a Trapezoid with LCD display and measures 12-3/8" x 4-1/2" and has 11 buttons...MSRP: $649.99$549.99 -
Viper Impeller & Seal Kit, 5.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
MSRP: $74.99$51.99This kits is a Waterway Viper Pump 5.0 Impeller, Seal, Install Tool and Silicone.. A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have...MSRP: $74.99$51.99 -
Part Categories Air Bleed Valve, Pentair Rainbow RDC/RTL/Bromine
MSRP: $11.99$8.99Air Bleed Valve, Pentair Rainbow RDC/RTL/Bromine If you need an o-ring for this part this is the link: O-Ring, 3/8" ID, 1/16" Cross SectionMSRP: $11.99$8.99 -
Wet End, Vico, Ultima, 2.0hp, 2"mbt, 48fr
MSRP: $209.99$139.99This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 2.0HP impeller which would fit a motor that has 10.0 amps at 230V and 16...MSRP: $209.99$139.99 -
Wet End, Vico, Ultima, 4.0hp, 2"mbt, 48fr, 4 Bolt
MSRP: $129.99$109.99This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 4.0HP impeller which would fit a motor that has 12.0-14.0 amps at 230V...MSRP: $129.99$109.99 -
XP2 1.5 HP Impeller Aqua-Flo 2 1/8" Eye with 5/16" Vane Width 4" OD 230/9A or 115/14A
MSRP: $44.99$38.99This is a 1.5HP Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the...MSRP: $44.99$38.99 -
XP2 4.0 HP 2 1/8" Eye Impeller & Seal (1) Bearing Kit Aqua-Flo 230V 14Amp
MSRP: $84.99$68.99This is a 4HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. Note: The...MSRP: $84.99$68.99 -
Waterway Mini Storm Thread-In Jet, Twin Roto, Gray/SS, 3"
MSRP: $30.22$24.99Thread-In Mini Storm Jet with twin roto nozzle made by Waterway. This jet has a 3" face diameter in gray and stainless steel and threads into the jet body provding a long lasting tight fit...MSRP: $30.22$24.99 -
Wet End, Vico, Ultima, 3.0hp, 2"mbt, 48fr, 4 Bolt
MSRP: $209.99$139.99This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 3.0HP impeller which would fit a motor that has 10.0-12.0 amps at 230V...MSRP: $209.99$139.99 -
Impeller, Aqua-Flo FMHP, FMCP, TMCP, FMVP, 1.5HP
MSRP: $44.99$34.99This is a 1.5HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 1.5HP Motor that has about 9.0 Amps on High Speed at 230V and 14.0 Amps at 115V...MSRP: $44.99$34.99
Featured
Impeller & Seal Kit for 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End
MSRP:
$81.99
$56.99
This Impeller and Seal Kit is used ONLY in a 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End. The impeller may have the number B432-01, B432-02, B432-03, B432-04,...
Impeller & Seal Kit for WTC-50 Hot Tub Circulation Pump Wet End
MSRP:
$81.99
$56.99
This Impeller and Seal Kit is used ONLY in Intertek WTC50 Pumps Only. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures about 3 5/8"...
ProAqua Scum Disc Remover Oil Absorbent ScumBug
MSRP:
$8.99
$6.99
The ProAqua™ Spa Disc Oil & Scum Remover is an innovative floating device designed to attract and remove oils, lotions, and surface contaminants from your spa water. Each ProAqua™ Spa Disc Oil...
Filter 8 1/4" Tall x 6' Wide 1-1/2"SAE Threaded 40sqft Gulf Coast Spas, Garden Leisure Spas, Freestyle Spas, Pilates Spas, and La-Z-Boy Spas. Gulf Coast Spas, Garden Leisure Spas, Freestyle Spas, Pilates H2O Spas, Lay-Z-boy Spas
MSRP:
$55.83
$44.99
This Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter...
Balboa BP7 Spa Pack Only, 5.5 KW Heater
MSRP:
$499.99
$454.99
BP7, Balboa's latest platform, integrates their patented M7 technology along with enhanced wifi and bluetooth capabilities, emphasizing effortless installation all bundled into one sleek package...
Hot Tub Spa Air Manifold Part 1" Slip X 1" Spigot X (8) 3/8" Barbs with Plug Cap
MSRP:
$17.99
$12.99
This part is a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold.
The Manifold recieves a 1" pipe on one side and then slips into a 1"...
Out of stock
Hot Tub Foam Repair Replacement Low Density Kit Versi-Foam System 1
MSRP:
$129.99
$109.99
Hot Tub Foam Repair Replacement Low Density Kit Versi-Foam System 1
PRODUCT:
Versi-Foam System 1 Spray Polyurethane Foam Kit. High Density Insulation & Foam Roof Repair, Low Pressure Spray. 12...
Threaded Style, 5", Power Storm, Jet, Waterway, 5 Scallop, Gray, Spinner
MSRP:
$36.99
$26.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Single Roto style internal and Adjustable on/off control.
Threaded Style, 5", Power Storm, Jet, Waterway, 5 Scallop, Gray, Straight
MSRP:
$32.99
$24.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Straight style internal and Adjustable on/off control.
Threaded Style, 5", Power Storm, Jet, Waterway, Stainless, Twin Spin
MSRP:
$51.99
$41.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. Stainless Steel and Gray, 5" Smooth face, with Twin Roto style internal and Adjustable on/off control.
Jacuzzi 1" Waterfall On/Off Valve Assembly 2015+ J-500 Series
MSRP:
$82.95
$62.99
Genuine Jacuzzi 1" on/off waterfall control valve assembly in gray and black two tone design. Used on the 2015+ J500 series and others. This assembly includes the handle, cap, gaskets/o-rings and...
Out of stock
Vico 56 European Style Pump, 3HP, 1SP, WOW, 9 O'Clock,230V, 6 Amp
MSRP:
$419.99
$399.99
This 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump..
This is a Direct Replacement Cal Spa Part # PRC014X
On Sale
Hot Tub Manifold Repair Tool, Cutter, Vinyl and Hose, Cuts 3/8" Up to 1" Vinyl and Flex
MSRP:
$29.99
Now:
$9.99
Was:
$19.99
This tool is a Flex Pipe or Vinyl Tubing Cutter works on air line 3/8" up to water lines 1"..
3/8" air, 1/2" Water, 3/4" Water Vinyl or Flex and 1" Water Vinyl or Flex..
Tool Type...
Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump
MSRP:
$899.99
$845.99
This part is a Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump.
Filter Sundance, 19" x 7", with a 2 1/2" Hole and a 1-1/2" MPT, 90sqft
MSRP:
$151.99
$119.99
Sundance Spas 90 Sq Ft Filter Cartridge. This filter has a 19" length, 7" diameter, has a 2-1/2" hole on one side and a 1-1/2" MPT thread on the other.
Filter Rainbow Pentair Predator-II-Mini 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes
MSRP:
$53.99
$43.99
This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..
Seal 1431501-03 for LX, Spa Hot Tub Pump Wet End Seal
MSRP:
$41.99
$36.99
This Item is a seal for the LX Hot Tub pump with the part number 1431501-03.
It may have a Vendor Code 3536 on the LX Brand Pump.
These pumps usually have the part number 1431501-03 on the label for...
Replacement Wet End for 1431501-03 Pump, LX , 1.0HP, 115, 1-1/2"MBT, Side Discharge, Vendor Code 3536
MSRP:
$139.99
$114.99
This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump.
It may have a Vendor Code 3536 LX Brand Pump.
These pumps usually have the part number...
Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge
MSRP:
$137.99
$114.99
This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge..
This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1...
Set of (10) Diffusers, Poly Storm, Jet, Repair, 3 3/8" to 4", Face Width, Waterway, Back
MSRP:
$139.99
$108.99
This kit is a set of (10) Replacement Jet Back Diffusers for a 3 3/8" to 4" Waterway Poly Storm Jet...