- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Spa Hot Tub Diverter Silver S Handle 4 5/16" Long 2 1/8" Wide and Cap 3 11/16" Wide Graphite & O-Ring Kit
MSRP: $59.99$34.99This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only. This Diverter Knob has a S Shaped Top and mounts on top of the...MSRP: $59.99$34.99 -
Sensor Set, Balboa, 96" Temp 3/8"diameter, 31" Hi Limit 1/4"diameter, 4-pin
MSRP: $108.99$82.99This is a Balboa Temperature & Hi Limit Combination. This is a standard part and fits most Balboa 4 pin applications that are no M-7. It features a 4 pin connector will Curley Finger style ends...MSRP: $108.99$82.99 -
XP2 2.5 HP 2 1/8" Eye Impeller & Seal Kit Aqua-Flo 230 11 Amp
MSRP: $58.99$48.99This is a 2.5HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things...MSRP: $58.99$48.99 -
O-Ring Heater or Pump Union 2-3/8" ID 1/8" 2 1/2" Center to Center
MSRP: $6.99$4.99This part is a O-Ring Heater or Pump Union 2-3/8" ID 1/8" 2 1/2" Center to Center This o-ring is used in many different applications such as heater 2" tailpiece unions or pump unions as well as some...MSRP: $6.99$4.99 -
Jet Body "L" Gasket, Waterway Adjustable Cluster Storm
MSRP: $5.99$3.99Adjustable Cluster Storm Jet Body "L" GasketFits a Jet Body with a 2" Jet face diameter, 1-1/2" hole size.. Part Type Gasket Jet Part...MSRP: $5.99$3.99 -
Large O-Ring, 5-7/8" ID, 3/16" Cross Section, Fits Some Filter Housings, Pressure, Waterway, Rainbow
MSRP: $8.99$6.99This 5 7/8" O-Ring is used in many different applications such as filter housings with screw on housing bosides as well as some pool applications. The inside diameter is 5 7/8 and it is 3/16" wide...MSRP: $8.99$6.99 -
Filter 17 13/16" Tall x 6-9/16" with 2 3/8" Hole on Top and Bottom 100sqft Four Winds Swim Spa H2O
MSRP: $143.99$103.99This part is a 100 Square Foot Filter Cartridge that is 17 13/16" Tall x 6-9/16" Wide with a 2 3/8" Hole on Top and Bottom it can be found in some H2O or Four Winds Swim Spas and many other brands as...MSRP: $143.99$103.99 -
XP2 1.0 HP 2 1/8" Eye Impeller & Seal Kit Aqua-Flo 230V 8 Amp or 115V 12 Amp
MSRP: $58.99$48.99This is a 1.0HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps on...MSRP: $58.99$48.99 -
Out of stock
NLA Motor Thru Bolts, Century, Regal Beloit, 10-32 x 9-5/8" Long x 3" thread, 5/16" Head
MSRP: $9.99$7.99This thru bolt is no longer available.. Your only choice here is a longer one and cut it off.. Motor Thru Bolt, Generic, 10-32 x 12" Long x 2" thd, 56 Frame, 5/16" Head This thru-bolt is 10-32...MSRP: $9.99$7.99 -
Orifice Fitting, 90 degree, G&G, use with Micro Jet Body, 1/4" Orifice x 3/4" Barb
MSRP: $9.99$6.99This part is a 90 degree Barb used in conjunction with a Micro Jet Body for the water connection that is 3/4" Barb and Glues inside of the Bullet Jet Body... Below is a list of the parts...MSRP: $9.99$6.99 -
XP2 1.0 HP 2 1/8" Eye Impeller & Seal (2) Bearing Kit Aqua-Flo 230V 8 Amp or 115V 12 Amp
MSRP: $99.99$78.99This is a 1.0HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12...MSRP: $99.99$78.99 -
Gasket for Jet Body, CMP, 500, 5" Typhoon, Hole Size 3 3/4"
MSRP: $7.99$4.99Gasket Only for a CMP Typhoon 500 Jet Body For Gasket is for a Jet Body thats fits these jets Click this Link: Typhoon 500 Jets Part Type Gasket Jet Part...MSRP: $7.99$4.99
Featured
Impeller & Seal Kit for 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End
MSRP:
$81.99
$56.99
This Impeller and Seal Kit is used ONLY in a 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End. The impeller may have the number B432-01, B432-02, B432-03, B432-04,...
Impeller & Seal Kit for WTC-50 Hot Tub Circulation Pump Wet End
MSRP:
$81.99
$56.99
This Impeller and Seal Kit is used ONLY in Intertek WTC50 Pumps Only. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures about 3 5/8"...
ProAqua Scum Disc Remover Oil Absorbent ScumBug
MSRP:
$8.99
$6.99
The ProAqua™ Spa Disc Oil & Scum Remover is an innovative floating device designed to attract and remove oils, lotions, and surface contaminants from your spa water. Each ProAqua™ Spa Disc Oil...
Filter 8 1/4" Tall x 6' Wide 1-1/2"SAE Threaded 40sqft Gulf Coast Spas, Garden Leisure Spas, Freestyle Spas, Pilates Spas, and La-Z-Boy Spas. Gulf Coast Spas, Garden Leisure Spas, Freestyle Spas, Pilates H2O Spas, Lay-Z-boy Spas
MSRP:
$55.83
$44.99
This Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter...
Balboa BP7 Spa Pack Only, 5.5 KW Heater
MSRP:
$499.99
$454.99
BP7, Balboa's latest platform, integrates their patented M7 technology along with enhanced wifi and bluetooth capabilities, emphasizing effortless installation all bundled into one sleek package...
Hot Tub Spa Air Manifold Part 1" Slip X 1" Spigot X (8) 3/8" Barbs with Plug Cap
MSRP:
$17.99
$12.99
This part is a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold.
The Manifold recieves a 1" pipe on one side and then slips into a 1"...
Out of stock
Hot Tub Foam Repair Replacement Low Density Kit Versi-Foam System 1
MSRP:
$129.99
$109.99
Hot Tub Foam Repair Replacement Low Density Kit Versi-Foam System 1
PRODUCT:
Versi-Foam System 1 Spray Polyurethane Foam Kit. High Density Insulation & Foam Roof Repair, Low Pressure Spray. 12...
Threaded Style, 5", Power Storm, Jet, Waterway, 5 Scallop, Gray, Spinner
MSRP:
$36.99
$26.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Single Roto style internal and Adjustable on/off control.
Threaded Style, 5", Power Storm, Jet, Waterway, 5 Scallop, Gray, Straight
MSRP:
$32.99
$24.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Straight style internal and Adjustable on/off control.
Threaded Style, 5", Power Storm, Jet, Waterway, Stainless, Twin Spin
MSRP:
$51.99
$41.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. Stainless Steel and Gray, 5" Smooth face, with Twin Roto style internal and Adjustable on/off control.
Jacuzzi 1" Waterfall On/Off Valve Assembly 2015+ J-500 Series
MSRP:
$82.95
$62.99
Genuine Jacuzzi 1" on/off waterfall control valve assembly in gray and black two tone design. Used on the 2015+ J500 series and others. This assembly includes the handle, cap, gaskets/o-rings and...
Out of stock
Vico 56 European Style Pump, 3HP, 1SP, WOW, 9 O'Clock,230V, 6 Amp
MSRP:
$419.99
$399.99
This 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump..
This is a Direct Replacement Cal Spa Part # PRC014X
On Sale
Hot Tub Manifold Repair Tool, Cutter, Vinyl and Hose, Cuts 3/8" Up to 1" Vinyl and Flex
MSRP:
$29.99
Now:
$9.99
Was:
$19.99
This tool is a Flex Pipe or Vinyl Tubing Cutter works on air line 3/8" up to water lines 1"..
3/8" air, 1/2" Water, 3/4" Water Vinyl or Flex and 1" Water Vinyl or Flex..
Tool Type...
Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump
MSRP:
$899.99
$845.99
This part is a Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump.
Filter Sundance, 19" x 7", with a 2 1/2" Hole and a 1-1/2" MPT, 90sqft
MSRP:
$151.99
$119.99
Sundance Spas 90 Sq Ft Filter Cartridge. This filter has a 19" length, 7" diameter, has a 2-1/2" hole on one side and a 1-1/2" MPT thread on the other.
Filter Rainbow Pentair Predator-II-Mini 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes
MSRP:
$53.99
$43.99
This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..
Seal 1431501-03 for LX, Spa Hot Tub Pump Wet End Seal
MSRP:
$41.99
$36.99
This Item is a seal for the LX Hot Tub pump with the part number 1431501-03.
It may have a Vendor Code 3536 on the LX Brand Pump.
These pumps usually have the part number 1431501-03 on the label for...
Replacement Wet End for 1431501-03 Pump, LX , 1.0HP, 115, 1-1/2"MBT, Side Discharge, Vendor Code 3536
MSRP:
$139.99
$114.99
This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump.
It may have a Vendor Code 3536 LX Brand Pump.
These pumps usually have the part number...
Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge
MSRP:
$137.99
$114.99
This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge..
This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1...
Set of (10) Diffusers, Poly Storm, Jet, Repair, 3 3/8" to 4", Face Width, Waterway, Back
MSRP:
$139.99
$108.99
This kit is a set of (10) Replacement Jet Back Diffusers for a 3 3/8" to 4" Waterway Poly Storm Jet...