- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Garden Tub Pump,Bath,Waterway Genesis,7.5A,115v,1-1/2",w/Rubber Foot Pads
MSRP: $231.14$179.78This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 7.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8"...MSRP: $231.14$179.78 -
Garden Tub Pump,Bath,Waterway Genesis,5.5A,115v,1-1/2",w/Rubber Foot Pads
MSRP: $217.80$169.40This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 5.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8"...MSRP: $217.80$169.40 -
Garden Tub Pump,Bath,Waterway Genesis,9.5A,115v,1-1/2",w/Rubber Foot Pad
MSRP: $368.74$259.99This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 9.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8"...MSRP: $368.74$259.99 -
Circulation Pump Wet End, Aqua-Flo, FMCP, 1/15HP, 1-1/2"mbt, 48 frame Flo-Master Series
MSRP: $139.99$129.99This part is a Complete Flo-Master CMCP 1/15HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with...MSRP: $139.99$129.99 -
Pool Wall Return Drain Plug 1 1/2" mpt w/O-Ring
MSRP: $4.20$3.27This part is a 1 1/2" MPT Threaded plug that is used in Swimming Pools to block off the 1 1/2" Threaded returns when winterizing to stop water from being in the plumbing system and used on some Sand...MSRP: $4.20$3.27 -
EX2 2.5 HP Impeller Waterway 2 1/8" Eye 230/11A
MSRP: $59.99$49.99This is a 2.5HP Impeller with a 2 1/8" Eye width for a Waterway 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an...MSRP: $59.99$49.99 -
Pool Wall Return Drain Plug 1 1/2" mpt w/O-Ring, Winterize Plug
MSRP: $4.99$3.49This part is a 1 1/2" MPT Threaded plug that is used in Swimming Pools to block off the 1 1/2" Threaded returns when winterizing to stop water from being in the plumbing system and used on some Sand...MSRP: $4.99$3.49 -
O-Ring 10" ID 1/4" Cross Section Pool Filter Pump
MSRP: $13.86$10.78This O-Ring can be found in some American Products, AquaFlo, Gecko, Hayward, Sta-Rite, Pentair, Sonnafarrel, Martec, Advantage, Filter housings to seal the multiport. Application - Category Filter,...MSRP: $13.86$10.78 -
Heater Element, 5.5kW, 10-3/4" ,115v/230v, M7, Titanium (Best)
MSRP: $129.99$89.99This part is a 5.5KW Titanium (Best) Heater Element. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko,...MSRP: $129.99$89.99 -
Jet Body, Pentair Euro, Air 3/8" barb x Water 3/4" barb, Ell Style
MSRP: $14.99$9.99Jet Body, Pentair Euro, Air 3/8" barb x Water 3/4" barb, Ell Style Fittings for this body: Jet Intrnl, BWG/Pent Euro, 1-1/2"fd,Swirl,w/Wall Fitting,Wht Jet Intrnl ,BWG/Pent Euro,...MSRP: $14.99$9.99 -
Out of stock
NLA Volute , 4 Mounts, Pump, Jacuzzi® or Sundance®, Piranha, Thera-max, Thera-Flo
MSRP: $59.99$49.99This part is NO Longer Available and there are no replacements.. This Part is a Volute Back with 4 mounts only for a Piranha Ther-Flo, Thera-Max pump only. This Part is used mostly in...MSRP: $59.99$49.99 -
Complete Pump, Aqua-Flo New Style Maelstrom, XP2e Equivalent, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A
MSRP: $632.99$429.99This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy. This pump is a new release from Aqua-Flo designed to be a less expensive...MSRP: $632.99$429.99
Featured
Impeller & Seal Kit for 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End
MSRP:
$81.99
$56.99
This Impeller and Seal Kit is used ONLY in a 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End. The impeller may have the number B432-01, B432-02, B432-03, B432-04,...
Impeller & Seal Kit for WTC-50 Hot Tub Circulation Pump Wet End
MSRP:
$81.99
$56.99
This Impeller and Seal Kit is used ONLY in Intertek WTC50 Pumps Only. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures about 3 5/8"...
ProAqua Scum Disc Remover Oil Absorbent ScumBug
MSRP:
$8.99
$6.99
The ProAqua™ Spa Disc Oil & Scum Remover is an innovative floating device designed to attract and remove oils, lotions, and surface contaminants from your spa water. Each ProAqua™ Spa Disc Oil...
Filter 8 1/4" Tall x 6' Wide 1-1/2"SAE Threaded 40sqft Gulf Coast Spas, Garden Leisure Spas, Freestyle Spas, Pilates Spas, and La-Z-Boy Spas. Gulf Coast Spas, Garden Leisure Spas, Freestyle Spas, Pilates H2O Spas, Lay-Z-boy Spas
MSRP:
$55.83
$44.99
This Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter...
Balboa BP7 Spa Pack Only, 5.5 KW Heater
MSRP:
$499.99
$454.99
BP7, Balboa's latest platform, integrates their patented M7 technology along with enhanced wifi and bluetooth capabilities, emphasizing effortless installation all bundled into one sleek package...
Hot Tub Spa Air Manifold Part 1" Slip X 1" Spigot X (8) 3/8" Barbs with Plug Cap
MSRP:
$17.99
$12.99
This part is a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold.
The Manifold recieves a 1" pipe on one side and then slips into a 1"...
Out of stock
Hot Tub Foam Repair Replacement Low Density Kit Versi-Foam System 1
MSRP:
$129.99
$109.99
Hot Tub Foam Repair Replacement Low Density Kit Versi-Foam System 1
PRODUCT:
Versi-Foam System 1 Spray Polyurethane Foam Kit. High Density Insulation & Foam Roof Repair, Low Pressure Spray. 12...
Threaded Style, 5", Power Storm, Jet, Waterway, 5 Scallop, Gray, Spinner
MSRP:
$36.99
$26.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Single Roto style internal and Adjustable on/off control.
Threaded Style, 5", Power Storm, Jet, Waterway, 5 Scallop, Gray, Straight
MSRP:
$32.99
$24.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Straight style internal and Adjustable on/off control.
Threaded Style, 5", Power Storm, Jet, Waterway, Stainless, Twin Spin
MSRP:
$51.99
$41.99
This part is a Jet Internal, Waterway Power Storm, Thread-In style. Stainless Steel and Gray, 5" Smooth face, with Twin Roto style internal and Adjustable on/off control.
Jacuzzi 1" Waterfall On/Off Valve Assembly 2015+ J-500 Series
MSRP:
$82.95
$62.99
Genuine Jacuzzi 1" on/off waterfall control valve assembly in gray and black two tone design. Used on the 2015+ J500 series and others. This assembly includes the handle, cap, gaskets/o-rings and...
Out of stock
Vico 56 European Style Pump, 3HP, 1SP, WOW, 9 O'Clock,230V, 6 Amp
MSRP:
$419.99
$399.99
This 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump..
This is a Direct Replacement Cal Spa Part # PRC014X
On Sale
Hot Tub Manifold Repair Tool, Cutter, Vinyl and Hose, Cuts 3/8" Up to 1" Vinyl and Flex
MSRP:
$29.99
Now:
$9.99
Was:
$19.99
This tool is a Flex Pipe or Vinyl Tubing Cutter works on air line 3/8" up to water lines 1"..
3/8" air, 1/2" Water, 3/4" Water Vinyl or Flex and 1" Water Vinyl or Flex..
Tool Type...
Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump
MSRP:
$899.99
$845.99
This part is a Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump.
Filter Sundance, 19" x 7", with a 2 1/2" Hole and a 1-1/2" MPT, 90sqft
MSRP:
$151.99
$119.99
Sundance Spas 90 Sq Ft Filter Cartridge. This filter has a 19" length, 7" diameter, has a 2-1/2" hole on one side and a 1-1/2" MPT thread on the other.
Filter Rainbow Pentair Predator-II-Mini 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes
MSRP:
$53.99
$43.99
This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..
Seal 1431501-03 for LX, Spa Hot Tub Pump Wet End Seal
MSRP:
$41.99
$36.99
This Item is a seal for the LX Hot Tub pump with the part number 1431501-03.
It may have a Vendor Code 3536 on the LX Brand Pump.
These pumps usually have the part number 1431501-03 on the label for...
Replacement Wet End for 1431501-03 Pump, LX , 1.0HP, 115, 1-1/2"MBT, Side Discharge, Vendor Code 3536
MSRP:
$139.99
$114.99
This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump.
It may have a Vendor Code 3536 LX Brand Pump.
These pumps usually have the part number...
Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge
MSRP:
$137.99
$114.99
This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge..
This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1...
Set of (10) Diffusers, Poly Storm, Jet, Repair, 3 3/8" to 4", Face Width, Waterway, Back
MSRP:
$139.99
$108.99
This kit is a set of (10) Replacement Jet Back Diffusers for a 3 3/8" to 4" Waterway Poly Storm Jet...