1556 results for '3/8"'

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 5.0HP I would call it a 4.5HP 230V Side Discharge...

Aqua-Flo Xp2 Flo-Master 48Frame Pump Face O-Ring Only fits around the Face of a Xp Pump Face exclusively for An Aqua-Flo Xp 48 frame pump which has 2" inlet and outlet which measures about 3" across...

You are buying a Kit that features (1) PS-201 Seal and (2) Bearings that fit most motors that are mated to Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to...

This 5 3/4" Inside Diameter O-Ring fits around the face of a Waterway HI-Flo 48 Frame Wet End all Horsepowers and fitting sizes... This is (1) O-Ring ONLY!! As you can see below it...

This part is a Complete Hi-Flo Side Discharge 1.0HP 10.8/2.8 Amp 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for...

You are buying a 2 1/2" Thread X 2 1/2" Slip Heater Union with Gasket that matches Union. The Union receives a 2 1/2" pipe or fitting on the glue side and then Screws to a 2 1/2'"...

Waterway Viper Pump Face O-Ring fits around the Face of a Viper Pump exclusively for A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... This...

We are offering a Cartridge Filter 9 1/4" Tall x 6" Wide 2"mpt 40sqft and fits newer Master Spa Legend and Twilight Series tubs as a replacement for the Microban filter previously used...

This part is a Temperature Sensor found in some Jacuzzi J-Series and Sundance hot tubs that have Curled Finger Style connector..  See the pictures for the Curley finger style...

This part is a (2) Hot Tub Spa Old Style Manifolds glued together that is 1 1/2" Slip on one end and 1 1/2" Street on the other end with a dead end knock out.. In other words the Street end has a...

This Kit is a Set of (9) Replacement Gaskets Only (3) Gasket for the "A" Coupling and (6) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L...

This is a XP2e 2.0HP Impeller.. The Impeller has a 2 5/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 10.0 Amps on high speed at 230V or 16.0 Amps on High at 115V...