Screwplug Element,1"thd,1.5/5.5kW,Comfortzn/Coates,115v/230v

(No reviews yet) Write a Review

SKU:: HTP47-555-2010
Shipping:: Calculated at Checkout

Screwplug Element,1"thd,1.5/5.5kW,Comfortzn/Coates,115v/230v

MSRP: $50.31

$39.13

— You save $11.18

Current Stock: 98

Quantity:

Description

Description

View AllClose

Related Products

Related Products

Screwplug Element, 1"thd, 5.5kW, C-Spa XI, 15-1/4", 230v

MSRP: $64.23

$49.96

1" Screw Plug, Screw on TerminalsNo thermowells, 5.5kW/240v ratingCalSpa, Ramco1" thd elements measure 1-1/4" o.d

Threaded Screwplug Element, 1-1/4" thread, 5.5kW, 230v, 8" long

MSRP: $169.99

$99.99

This is a 1-1/4"npt Plug Element that is 8" long and it threads into a fitting in the plumbing.. With 10-32 thd studs, dual 5/16" thermowells, predrilled holes for mounting junction box 1-1/4"...

Threaded Screwplug Element, 1-1/4" thread, 5.5kW, 230v, 9.75" long

MSRP: $169.99

$99.99

This is a 1-1/4"npt Plug Element that is 9 3/4" long and it threads into a fitting in the plumbing.. With 10-32 thd studs, dual 5/16" thermowells, predrilled holes for mounting junction box 1-1/4"...

Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal

MSRP: $79.99

$59.99

This part is a Center Mount 5.5KW Incoloy Heater Element for 230V or 115V Applications.

Heater Element, 5.5kW, 10-3/4" ,115v/230v, M7, Titanium (Best)

MSRP: $129.99

$79.99

This part is a 5.5KW Titanium (Best) Heater Element. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko,...

Heater Element 5.5kw Hot Tub Spa Part M-7 Universal 230V or 115V Incoloy (Good)

MSRP: $69.50

$44.99

This part is a Standard 5.5KW Incoloy Heater Element for 230V or 115V Applications that features the bend in the back of the element need

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

This kit comes with a 3 button duplex topside with a Black Out plate that measures 8 9/16" long x 3 1/2" wide to take up the space if you are replacing a larger topside system.
This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

NLA Control Retrofit Kit Balboa VS500Z, 1 Pump ,5.5kW,115v or 230v, With Light and Cords

MSRP: $1,263.74

$582.91

This system is no longer available from the manufacturer.. Click here for a replacement system: Retrofit MODPACK Control Pack, (2) Pump, Ozone and 5.5kW, 115v or 230v This is a Balboa Retrofit...

Heater, FloThru, Balboa, M7, 15" x 2", 230v, 5.5kW, with Sensors — Add to Cart

Quick view

Heater, Flo Thru, Balboa, M7, 15" x 2", 230v or 115v, 5.5kW, with Sensors

MSRP: $379.43

$224.99

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V.Thie heater measures 2" Inside Diameter of the tube and the length of the tube is 15". Includes M7 sensors,...

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump, it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 4 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

This is a chart that you can use to see what the different kits will and will not run. — Quick view

Control Retrofit Kit Balboa VS500Z Mini Oval, 1 Pump ,5.5KW,115V OR 230V, W/ Light and Cords

MSRP: $1,179.51

$579.99

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube...