Waterway Executive Wet Ends 2 1/2" x 2"

Waterway Executive Wet Ends 2 1/2" x 2"


In this Category you will find Waterway Executive 48 and 56 Frame 2 1/2" x 2" Wet Ends where the Suction "Inlet" Side measures about 3 5/8"' edge to edge and the Outlet "Pressure" Side measures about 3" edge to edge..

 The way you can tell if your wet end is 48 or 56 frame you would measure the distance between the holes on the through bolts both in an X pattern and a Square pattern.. 

 A 48 frame Wet End wet end measures about 5 1/8" center to center in an x pattern.. 

A 56 frame Wet End wet end measures about 5 3/4" center to center in an x pattern..  

 

A 48 frame Wet End wet end measures about 3 5/8" center to center in a square pattern..

A 56 frame Wet End wet end measures about 4 1/8" center to center in a square pattern.. 

A 2" Threaded fitting measures about 3" edge to edge on the top pressure side and the front suction side measures about 3 â…ť” edge to edge..

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Dynasty Pump Barb Bleeder Connection Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Dynasty Pump Barb Bleeder Connect Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings

    MSRP: $34.99
    $24.99
    This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...
    MSRP: $34.99
    $24.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $34.99
    $24.99
    Subtotal:
  • Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings

    MSRP: $16.99
    $13.99
    This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...
    MSRP: $16.99
    $13.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.99
    $13.99
    Subtotal:
  • 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing
    Add to Cart

    2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing

    MSRP: $7.99
    $4.99
    This O-Ring is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...
    MSRP: $7.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $7.99
    $4.99
    Subtotal:
  • Connection Kit,  3/8" Tubing, 1/2" OD,  6" length for Air Systems or Jet Body Air Connections Connection Kit,  3/8" Tubing, 1/2" OD,  6" length for Air Systems or Jet Body Air Connections
    Add to Cart

    Connection Kit, 3/8" Tubing, 1/2" OD, 6" length for Air Systems or Jet Body Air Connections

    MSRP: $12.99
    $6.99
    This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...
    MSRP: $12.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $6.99
    Subtotal:
  • Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
The Hole size for this fitting is about 1 3/16" Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
The Hole size for this fitting is about 1 3/16"
    Add to Cart

    Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One

    MSRP: $29.99
    $19.99
    You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...
    MSRP: $29.99
    $19.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $29.99
    $19.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 5 HP Executive Barb Bleeder Kit The Barb screws into a bleeder screw hole like this and you use the silicone to seal it..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 5 HP Executive Barb Bleeder Kit

    MSRP: $169.99
    $134.99
    You are buying a 5 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.        The Bleeder Barb Replaces one of the plugs and is used...
    MSRP: $169.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $169.99
    $134.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 4 HP Executive Barb Bleeder Kit The Barb screws into a bleeder screw hole like this and you use the silicone to seal it..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 4 HP Executive Barb Bleeder Kit

    MSRP: $169.99
    $134.99
    You are buying a 4 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.  The Bleeder Barb Replaces one of the plugs and is used to reconnect your previous...
    MSRP: $169.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $169.99
    $134.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 3 HP Executive Barb Bleeder Kit A regular 2" pump union fitting measures about 3" edge to edge but this wet end is different on the front suction side and it measures about 3 5/8" edge to edge so be sure your wet end has a large suction side fitting before ordering this..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 3 HP Executive Barb Bleeder Kit

    $134.99
    You are buying a 3 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.  The Bleeder Barb Replaces one of the plugs and is used to reconnect your previous...
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    $134.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 2 HP Executive Barb Bleeder Kit The Barb screws into a bleeder screw hole like this and you use the silicone to seal it..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 2.0 HP Executive Barb Bleeder Kit

    MSRP: $169.99
    $134.99
    You are buying a 2 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.  The Bleeder Barb Replaces one of the plugs and is used to reconnect your previous...
    MSRP: $169.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $169.99
    $134.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 1 HP Executive Barb Bleeder Kit The Barb screws into a bleeder screw hole like this and you use the silicone to seal it..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 56 Fr 1.0 HP Executive Barb Bleeder Kit

    MSRP: $169.99
    $134.99
    You are buying a 1 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.  The Bleeder Barb Replaces one of the plugs and is used to reconnect your...
    MSRP: $169.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $169.99
    $134.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 48 Fr 5 HP Executive Barb Bleeder Kit The Barb screws into a bleeder screw hole like this and you use the silicon to seal it..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 48 Fr 5 HP Executive Barb Bleeder Kit

    MSRP: $169.99
    $134.99
    You are buying a 5 HP 48 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump and Bleeder Barb Kit complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon. The Bleeder Barb Replaces one of the plugs and is used to reconnect...
    MSRP: $169.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $169.99
    $134.99
    Subtotal:
  • Waterway Spa Pump Wet End 2 1/2" X 2" 48 Fr 4 HP Executive Barb Bleeder Kit The Barb screws into a bleeder screw hole like this and you use the silicon to seal it..
    Add to Cart

    Waterway Spa Pump Wet End 2 1/2" X 2" 48 Fr 4.0 HP Executive Barb Bleeder Kit

    MSRP: $169.99
    $134.99
    You are buying a 4 HP 48 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump and Bleeder Barb Kit complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon. The Bleeder Barb Replaces one of the plugs and is used to reconnect...
    MSRP: $169.99
    $134.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $169.99
    $134.99
    Subtotal:
  • Total: items /

Adding your products to cart