48 Frame Waterway Executive Wet Ends 2 1/2" X 2"
This Category Features 2 1/2" x 2" 48 Frame Waterway Executive Wetends... The way you can tell if your wet end is 48 frame you would measure the distance between the holes on the through bolts both in an X pattern and a Square pattern..
A 48 frame Wet End wet end measures about 5 1/8" center to center in an x pattern..
A 48 frame Wet End wet end measures about 3 5/8" center to center in a square pattern..
A 2" Threaded fitting measures about 3" edge to edge on the top pressure side and the front suction side measures about 3 â…ť” edge to edge..
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125" Cord Diameter
MSRP: $6.99$4.99This part is a O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125"Cord Diameter.. Additional Information Outside Diameter .682 Inside Diameter .434 Type Standard Spa Brands Sundance/JacuzziMSRP: $6.99$4.99 -
Pump Shaft Water Slinger, All Brands, Waterway , Aqua-flo, Sta-Rite, Vico, LX
MSRP: $4.99$2.99This part is a Pump Shaft Water Slinger designed to sling water away from the motor front bearing in case of a seal leak and it fits All Brands of Hot Tub Pumps.. This part goes on the shaft before you install the wet end..MSRP: $4.99$2.99 -
Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket
MSRP: $31.96$14.99This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...MSRP: $31.96$14.99 -
Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket
MSRP: $15.98$8.99This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...MSRP: $15.98$8.99 -
Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing
MSRP: $15.99$8.99This Kit is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...MSRP: $15.99$8.99 -
Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
MSRP: $13.99$9.99This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...MSRP: $13.99$9.99 -
Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
MSRP: $8.99$6.99This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...MSRP: $8.99$6.99 -
Red E 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics
MSRP: $24.99$19.99Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...MSRP: $24.99$19.99 -
Hot Tub 2" Pump Union Slice To Glue Plumbing Connect Kit
MSRP: $61.97$54.99This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...MSRP: $61.97$54.99 -
Hot Tub 2" Pump Union Slice To Plumbing Connect Kit
MSRP: $42.98$39.99This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...MSRP: $42.98$39.99 -
Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting
MSRP: $21.99$16.99This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...MSRP: $21.99$16.99 -
Tool, Die to Thread Chase Pump Motor Shafts American Pumps Only
MSRP: $27.99$16.99This Tool is a Die that fits all American made Hot Tub Pump shaft threads.. This fits Hot Tub Pumps only in these brands.. Waterway, Aqua-Flo, Sta-Rite, Vico and Power-Right.. Note: This will NOT for LX Intertek Motor Shaft...MSRP: $27.99$16.99