Waterway Complete Pumps

Waterway Complete Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $12.99
    $8.99
    This kit is a Air Bleeder barbed plug and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...
    MSRP: $12.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $8.99
    Subtotal:
  • Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting

    MSRP: $17.99
    $11.99
    This kit is anAir Bleeder barbed plug and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the pictures and measurements with your...
    MSRP: $17.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $17.99
    $11.99
    Subtotal:
  • 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder
    Add to Cart

    3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder

    MSRP: $4.99
    $3.99
    This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...
    MSRP: $4.99
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $4.99
    $3.99
    Subtotal:
  • How To Video Hot Tub Broken Pump Union Emergency Repair The Spa Guy How To Series

    How To Video Hot Tub Broken Pump Union Emergency Repair The Spa Guy How To Series

    $0.00
    In this video The Spa Guy shows you how to repair a broken Hot Tub Pump Union without cutting plumbing out and using an Emergency Pump Union Split Nut Kit...      #sparepair #hottubrepair  #thespaguy...
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • How To Video GFCI Breaker Tripping New Wire Up Hot Tub Diagnose The Spa Guy

    How To Video GFCI Breaker Tripping New Wire Up Hot Tub Diagnose The Spa Guy

    $0.00
    This video is The Spa Guy teaching you how to Diagnose a New Wire Up Situation where you just wired your hot tub up and it is tripping the breaker and it is either a new tub or it is used and ran fine at the last location...... Save
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Spa Hot Tub Waterway Executive Pump Seal Impeller & Bearing Replacement How To The Spa Guy

    How To Video Waterway Executive Pump Seal Impeller & Bearing Replacement How To The Spa Guy

    $0.00
    In this Video The Spa Guy tells you How To Replace a Waterway Executive Pump Seal,,Impeller & Bearing... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions  Video How To Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions  Video How To
    Add to Cart

    Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions Video How To

    MSRP: $23.99
    $18.99
    This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...
    MSRP: $23.99
    $18.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $23.99
    $18.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 1.0hp, 115v, 2-Speed, 48 frame, 2" X  2", 11.0 Amp Old Style and the new style.. You can replace the old style wet end with the new style but most parts will not interchange betweens them..
    Add to Cart

    Hi-Flo, Pump, Waterway, 1.0hp, 115v, 2-Speed, 48 frame, 2" X 2", 11.0 Amp

    MSRP: $596.99
    $429.99
    This part is a Complete Hi-Flo Side Discharge 1.0HO 11.0/2.9 Amp48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be...
    MSRP: $596.99
    $429.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $429.99
    Subtotal:
  • This Pump is a 2 1/2" x 2" which is only found in a few hot tubs like Catalina, Some Leisure Bay, Dynasty and a few others. Measure the intake and pressure side threads and match them up before ordering. WW Exec, 3.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage. This pump features a 2 1/2" Suction fitting that measures about 3 5/8" across the the threads and the pressure side 2" measures about 3" across the threads. Pump, WW Exec, 3.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM
    Add to Cart

    Pump Waterway Executive 3.0hp 230v 2-spd 56fr 2 1/2" X 2" 12 Amp

    MSRP: $659.99
    $479.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2 1/2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This pump is 12 Amps.. Motor Voltage 230v Speed 2 Speed (2-Spd) Motor...
    MSRP: $659.99
    $479.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $659.99
    $479.99
    Subtotal:
  • Pump, Waterway, Executive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps This pump features a 2" Suction fitting that measures about 3" across the the threads and the 2" pressure side measures about 3" across the threads.
Pump, Waterway, Exececutive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps
    Add to Cart

    Pump, Waterway, Executive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps

    MSRP: $688.99
    $499.99
    This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering.  This...
    MSRP: $688.99
    $499.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $688.99
    $499.99
    Subtotal:
  • Pump, Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2", OEM The Suction Side of this pump measures about 3" Across the threads..
    Add to Cart

    Pump, Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2", OEM

    MSRP: $549.99
    $439.99
    This complete pump is a Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2"...Spa Pump Features:Executive wet end designed specifically for 48-frame motorsLarge 6-1/2" diameter wet end for higher head pressure2" intake and dischargeWet end can be rotated...
    MSRP: $549.99
    $439.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $549.99
    $439.99
    Subtotal:
  • Pump, Waterway Executive, 1.0hp, 230v, 2-spd, 56fr, 2", 8.0 Amp Pump Waterway Executive True 1.0hp 230v 2-spd 56fr 2" 8.0 Amp Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage.
    Add to Cart

    Pump, Waterway Executive, 1.0hp, 230v, 2-spd, 56fr, 2" x 2" , 8.0 Amp

    MSRP: $626.99
    $439.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...
    MSRP: $626.99
    $439.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $626.99
    $439.99
    Subtotal:
  • Total: items /

Adding your products to cart