Waterway Complete Pumps

Waterway Complete Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Hi-Flo, Pump, Waterway, 1.5hp, 115v, 2-Speed, 48 frame, 2" X  2", 13.3 Amp Old Style and the new style.. You can replace the old style wet end with the new style but most parts will not interchange betweens them..

    Hi-Flo, Pump, Waterway, 1.5hp, 115v, 2-Speed, 48 frame, 2" X 2", 13.3 Amp

    MSRP: $596.99
    $384.99
    This part is a Complete Hi-Flo Side Discharge 1.5HP 13.3/4.1 Amp 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be...
    MSRP: $596.99
    $384.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $384.99
    Subtotal:
  • Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting

    MSRP: $21.99
    $16.99
    This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...
    MSRP: $21.99
    $16.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $21.99
    $16.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 3.0hp, 230v, 2-Speed, 48 frame, 2" X  2" Hi-Flo, Pump, Waterway, 3.0hp, 230v, 2-Speed, 48 frame, 2" X  2"

    Hi-Flo, Pump, Waterway, 3.0hp, 230v, 2-Speed, 48 frame, 2" X 2"

    MSRP: $696.99
    $599.99
    This pump is a Complete 3.0HP Hi-Flo Side Discharge 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be sure that the...
    MSRP: $696.99
    $599.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $696.99
    $599.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 1.0hp, 115v, 2-Speed, 48 frame, 2" X  2", 10.8/2.8 Amp Old Style and the new style.. You can replace the old style wet end with the new style but most parts will not interchange betweens them..

    Hi-Flo, Pump, Waterway, 1.0hp, 115v, 2-Speed, 48 frame, 2" X 2", 10.8/2.8 Amp

    MSRP: $596.99
    $434.99
    This part is a Complete Hi-Flo Side Discharge 1.0HP 10.8/2.8 Amp 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be...
    MSRP: $596.99
    $434.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $434.99
    Subtotal:
  • Spa Hot Tub Pump Universal Connect Kit Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting An example of the bleeder system and this barb in use on a Waterway Pump..

    Spa Hot Tub Pump Universal Connect Kit Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting

    MSRP: $19.99
    $14.99
    This Kit is a Universal Air Bleeder Connect Kit with (1) 1/4" Mpt X 3/8" Barb Plug, (1) 3/8" x 3/8" Barb Coupler, (4") of 3/8" Clear Tubing and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I...
    MSRP: $19.99
    $14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $19.99
    $14.99
    Subtotal:
  • Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $17.99
    $11.99
    This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...
    MSRP: $17.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $17.99
    $11.99
    Subtotal:
  • Dynasty Pump Barb Bleeder Connection Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings An example of the bleeder system and this barb in use on a Waterway Pump..

    Dynasty Pump Barb Bleeder Connect Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings

    MSRP: $34.99
    $24.99
    This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...
    MSRP: $34.99
    $24.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $34.99
    $24.99
    Subtotal:
  • Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings An example of the bleeder system and this barb in use on a Waterway Pump..

    Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings

    MSRP: $16.99
    $13.99
    This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...
    MSRP: $16.99
    $13.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.99
    $13.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 2.0hp, 230v, 2-Speed, 48 frame, 2" X  2" Hi-Flo, Pump, Waterway, 2.0hp, 230v, 2-Speed, 48 frame, 2" X  2"

    Hi-Flo, Pump, Waterway, 2.0hp, 230v, 2-Speed, 48 frame, 2" X 2"

    MSRP: $596.99
    $489.99
    This pump is a Complete 2.0HP Hi-Flo Side Discharge 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be sure that the...
    MSRP: $596.99
    $489.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $489.99
    Subtotal:
  • Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
The Hole size for this fitting is about 1 3/16" Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
The Hole size for this fitting is about 1 3/16"

    Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One

    MSRP: $29.99
    $19.99
    You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...
    MSRP: $29.99
    $19.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $29.99
    $19.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 1.0HP called 3.0hp, 230v, 2-Speed, 48 frame, 2" X  2" Hi-Flo, Pump, Waterway, 1.0HP called 3.0hp, 230v, 2-Speed, 48 frame, 2" X  2"

    Hi-Flo, Pump, Waterway, 1.0HP called 3.0hp, 230v, 2-Speed, 48 frame, 2" X 2"

    MSRP: $596.99
    $439.99
    You are buying a Complete 1.0HP called a 3.0HP Hi-Flo Side Discharge 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to...
    MSRP: $596.99
    $439.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $439.99
    Subtotal:
  • Pump, Waterway Viper, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM
The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16".. Pump, Waterway Viper, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM

    Pump, Waterway Viper, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM

    MSRP: $689.99
    $539.99
    This pump is a rated 5HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...
    MSRP: $689.99
    $539.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $689.99
    $539.99
    Subtotal:
  • Total: items /

Adding your products to cart