Pumps and Related Parts

This Part is a Volute Back with 8 mounts only for a Piranha Bracketless pump only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. Note: There are two different versions of...

This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame found in some Sundance or Jacuzzi Hot Tubs.For the motor that is used with this bracket click this link: Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A,...

This part is a 2.0 Horse Power 10.0/3.0 Amp (2) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA2002C-II and or 6500-343, 6500-092 on the label. The...

This part is (1) 1/8"x 1/8" X 1/8" Barbed Tee In-line Air Bleed that fits 1/8" OD , 3/16" ID Clear Hose on each side. These Will prevent very sensitive air switches from randomly activating due to thermal expansion of air and water vapor..  

This part is a Power Right Wet End Pump Face O-Ring Only fits around the Face of a Power Right Pump Face Generally found on Cal Spaa which has 2" inlet and outlet which measures about 3" across the threads...   Related Parts: Impeller,...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

Vico Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico. Rated at 1.5hp,which would be 8-9.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.  Click here for...

This part is a 2.5HP Impeller that fits some Piranha Wet Ends found on Sundance, Jacuzzi and other brand Hot Tubs.. Click Here for Seal and Other Part options for this impeller: (8) Mount Parts Impeller Type Closed Face Impeller Diameter...

This pump is a Complete 2.0HP Hi-Flo Side Discharge 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be sure that the...

This part is an Jacuzzi J Pump Face O-Ring.. It measures about 5 1/2" ID and has a 3/16" cross section Part Type O-Ring  O Reference Number O-150 Inside Diameter 5-1/2"id Cross Section 3/16" Application...