Pumps and Related Parts

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

This pump is no longer available. Balboa has discontinued many DJ models in 2024. You can use the 2.5 HP version of this pump here: Pump, Sta-Rite, Dura-Jet, DJ, 2.5hp, 230v, 2-spd, 48fr, 2"Side Discharge We also offer a close replacement pump here:...

This pump is a Aqua-Flo 1019801 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump..   If you...

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label. It is about 7 1/4"" across the face of the pump, it measures...

This is a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo Wet Ends...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Vendor Code 3536 LX Pump Wet End.

This part is a Wear Ring that only fits LX Vendor Code 3536 Impellers for a 48 or 56 Frame Pump Wet Ends and measures 13/16" thick from front to back... LX Pumps..  

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Vendor Code 3536 Intertek Brand Pump Wet End only.. It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...

You are buying a 2 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be...

This pump is a replacement for the Sundance TheraMax II 6500-901 56 frame 2.5HP (1) Speed 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage is 12 Amps on High Speed making it a 2...

This Pump is a Perfect Replacement for a LX 0982601-03 2.5HP 11.0/3.5 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it...