Pumps and Related Parts

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 5.0HP I would call it a 4.5HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 4.0HP I would call it a 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 3.0HP I would call it a 2.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This Vendor Code 3536 2.5 Horse Power Impeller, Seal, Silicon & Seal Installation Tool that fits a 56 Frame Pump Wet Ends manufactured by Intertek with numbers 39578-03, 37066-03 or 0982601-03 only.  See NOTES Below... Watch the video...

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You...

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on Sundance tubs and is also on Jacuzzi...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

This 2.0 Horse Power 230V 10.0/3.0 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA2002C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.5kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 2" which would measure about 2 3/8" OD or 1 1/2" which would measure about 1 7/8" OD pipe....

This part is a Bath Style (1) Speed Jacuzzi J-Pump, 115v, J Pump Style Fitting, 7.5A, w/Air Switch...   Note: This pump is equipped with an air switch. If the motor does not start upon plugging it in, the switch may be in the off position...