Parts by Group

  Important NOTE: This pump is not a standard Wua400 it is a 2 1/2" Suction which would measure about 3 5/8" across the threads by 2" which would measure about 3" across the threads..  DO NOT ORDER TYHIS PUMP UNLESS YOU ARE SURE IT IS CORRECT....

The WUA400-2/6 is on an extended back order and we don't have an ETA for its arrival. We recommend using the standard WUA400-II model. The difference between the two is the low speed amps are 3.4 amps higher and have a slighly higher rpm on the...

This 5.0 Horse Power 15.0/5.0 Amp (2) Speed 2 1/2" x 2 1/2" 56 Frame Complete Pump is a Intertek LX Brand Pump. These pumps usually have the part number Swim56-15, WUA-500-II, WP-500-II or LP-500-II on the label. Watch the video...

This pump is a rated 5HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...

This pump is a rated 4HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...

This is a Waterway Executive 115V 1 .5HP 48fr 2 1/2" x 2".. This pump is a very unusual one as it has a 2 1/2" Suction Side which measures about 3 5/8" edge to edge on the threads on the front suction side and 2" on the pressure side top which measures...

This 3 Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a intertek LX Brand Pump. These pumps usually have the part number WUA-300-II, WP-300-II or LP-300-II on the label. Watch the video for instruction on how to Identify...

This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering.  This...

This pump is a Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM This is an unusual pump meaning the suction side is called 2 1/2" and measures about 3 5/8" Across the threads and the Pressure Side is 2" and measures about 3"...

This pump is a 115V 48 Frame 2" X 2" Waterway Executive (2) Speed 1.5HP 13.3Amp on High and 4.1A on Low..  The Pressure and Suction sides measure about 3" edge to Edge across the threads..  The Waterway Executive 48 pump is thermally...

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 4-5HP 56 frame 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3"...

This Pump is a Waterway Executive, 4.5hp, 230v, 2-spd, 48fr, 2" x 2", 12.0A/3.5A.. The 2" x 2" Threaded fittings measure about 3" across the threads..  Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter wet...