NLA Control Retrofit Balboa VS501Z, 2 Pump ,5.5KW,115V OR 230V, W/ Light and Cords

This system is no longer made the replacement would be this one: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside

This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps  or (1) Jet Pump and a Blower, (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 4 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.  

When you purchase a Retrofit Kit from us you will have access to call us when installing for advice that is part of your purchase.

This complete retrofit spa pack VS-501 that can be hooked up 120/240V

Overall dimensions are 11" Tall x 15" Wide x 4-1/2" Deep

Retrofit Kit 54220-Z Includes: 

• 5.5kW heater with Balboa's patented M7 technology (no pressure switches)
• Spa Control System 54356-HC
• Panel Model - Mini-Oval: Panel Dimensions (in) 4.34 x 1.58 (cm) 11.02 x 4.01
• Other Parts Included - Cords, Bezel, and one LED light assembly

Replaces failure-prone mechanical pressure/flow switch
Can be plumbed to either suction or pressure side of pump
120/240V convertible power
Custom plastic enclosure
M7 flow/ temperature sensors
Rigorously tested
US & Canadian safety approvals

This system uses panel P/N 52144 and overlay P/N 11127